Manuals here: Bama Manual Archive
An RCA tube manual is really all you need to set up for testing. It reads directly on gm based on setting from the RCA tube book.
Video here: Testing Vacuum Tubes on the RCA WT-100A - YouTube
An RCA tube manual is really all you need to set up for testing. It reads directly on gm based on setting from the RCA tube book.
Video here: Testing Vacuum Tubes on the RCA WT-100A - YouTube
I have an RCA WT100A in my project pile that is missing the high voltage power transformer. Would someone have an interior view photo of the internal power supply. I need to determine the stack height of the transformer to determine the VA rating for a replacement. I do have scans for the various manuals including the available tube data chart.
Last edited:
Thank you for posting this pic! Solves a long unanswered question. Do you have a photo of the underside showing the transformer's terminal configuration?
Here's a link to a tube data chart showing WT100A pin settings for a list of tubes circa 1957 with a few blank pages for adding new tubes in the same layout pattern. https://elektrotanya.com/rca_wt-100a_tube_charts_1963_sm.pdf/download.html
Here's a link to a tube data chart showing WT100A pin settings for a list of tubes circa 1957 with a few blank pages for adding new tubes in the same layout pattern. https://elektrotanya.com/rca_wt-100a_tube_charts_1963_sm.pdf/download.html
- Home
- Design & Build
- Equipment & Tools
- RCA WT-100a: looking for manual