Ok all op-amps are NJM4558LD I have the same voltages on all of them..
Pin 1:24.18
Pin 2:12.04
Pin 3:12.01
Pin 4:12.18
Pin 5:0.88
Pin 6:12.02
Pin 7:12.04
Pin 8:10.98
I replaced my batteries in my multimeter since they were getting low and this is what i have now on all op-amps
Pin 1:24.18
Pin 2:12.04
Pin 3:12.01
Pin 4:12.18
Pin 5:0.88
Pin 6:12.02
Pin 7:12.04
Pin 8:10.98
I replaced my batteries in my multimeter since they were getting low and this is what i have now on all op-amps
When measuring the voltage (unless otherwise instructed - for this amp), place the black probe on one of the non-bridging speaker terminals.
Are you sure that all of the op-amps had the same voltage on pin 5?
Are you sure that you have the pin numbering right? It appears that they're reversed.
Are you sure that all of the op-amps had the same voltage on pin 5?
Are you sure that you have the pin numbering right? It appears that they're reversed.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Pyle PLA4180