shunt reg .........few pics of needle point
schm somewhere at
http://www.diyaudio.com/forums/showthread.php?postid=1248651#post1248651
I load 70mA ,shunt reg is burnin' ~ 80mA
schm somewhere at
http://www.diyaudio.com/forums/showthread.php?postid=1248651#post1248651
I load 70mA ,shunt reg is burnin' ~ 80mA
Attachments
ZM, your benchtop is my wife's worst nightmare - sometimes in the middle of my projects, I turn our kitchen table into that
Anyway, can't talk now, I have to find a big flat rock to cook some sausages on
On Topic: how long does it take for that rock to heat up enough to start cooking with?
Anyway, can't talk now, I have to find a big flat rock to cook some sausages on
On Topic: how long does it take for that rock to heat up enough to start cooking with?
twitchie said:ZM, your benchtop is my wife's worst nightmare - sometimes in the middle of my projects, I turn our kitchen table into that
luckily-that's my workshop.........where only me and spiders have rights to stay
Anyway, can't talk now, I have to find a big flat rock to cook some sausages on
On Topic: how long does it take for that rock to heat up enough to start cooking with?
as long as wood beneath the rock is fine in flame........
in fact - first sausage will tell ya........ when it start singing........
tip:
spill some oil on stone for first tranche of meat
Zen Mod said:just one more.......
air view
Is that the finished product?- Or are you going to put it in a chassis and solder a thing or two?
mpmarino said:
Is that the finished product?- Or are you going to put it in a chassis and solder a thing or two?
edit:
it takes two days with my schedule to needle point this;
first shot and it worked;
ha!
dreky Altec's lower
ya need this to power little preamp
1/2
mpmarino said:
Is that the finished product?- Or are you going to put it in a chassis and solder a thing or two?
ya need this to power little preamp
1/2
Attachments
ya need this to power little preamp
1/2
What? A shredded DB9 cable and a stoked butt??
You know I'm joking - I'd be lucky to make the thing work without flames
That is good lookin' Very nice, ZM.Zen Mod said:ha
that's why is that trimpot there........so I can set exact voltage
es44 said:
Darn Where do you stumble across these big heatsinks ? No matter where i turn, it seems like the only place to get them is at Conrad, and i dare not even think about the postage.
BTW congratulations, they look really nice
Just lucky I guess
Conrad's are not too bad regarding postage.
Steen
steenoe said:
Just lucky I guess
.........
Steen
heatsinks must be flying like pigs in DK
Zen Mod said:
heatsinks must be flying like pigs in DK
I just knew i did something wrong. I'm looking at the ground for them, maybe i better look in the air instead
es44 said:
I just knew i did something wrong. I'm looking at the ground for them, maybe i better look in the air instead
lookie lookie
Attachments
jacco vermeulen said:Look, there's a small ab-original in the picture.
what - you recognize me?
ZM as native Coca Cola Kid
(I have horn installed in my spk )
es44 said:No pigs here, but still watch-able
DiyA last supper?
Naah is second from right........
I'm the invisible one .......
- Home
- Amplifiers
- Pass Labs
- Pumpkin Preamp - Perfect for F4