hershann said:Looking for heatsink alternatives - I suppose the silkscreen PCB on the Cookbook is to scale?
And therefore the following below, which is 40mm wide would not fit?
http://www.futurlec.com/Heatsinks/TO218S049B.shtml
So I'm considering the below:
http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=513202b02500
http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=6032b-tt
http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=sw50-2g
Comments?
her shann
silkscreen is in scale - if you look it in 100% scale on screen
anyway - on last page you can find Fischer numbers
download this :
http://www.fischerelektronik.de/fischer/uploadfischerfcool/Fischer/A.1.E.pdf
and look
~ 4MB , but worthy
carpenter said:
I can't afford Magura...
don't worry ......... he's in your footsteps , all the time .........
Variac said:So Jacco, those resistors in the power supply you were talking about .. would it be better to use inductive wirewounds instead of non-inductive resistors?
negligible difference - use what you find in deepest end of your drawer ....... or stiva, whatever
jacco vermeulen said:noise-wise, wirewounds.
this thread is certainly biggest burlesca in forum ......... history
Zen Mod said:
this thread is certainly biggest burlesca in forum ......... history
burlesque(bər-lĕsk')
n.
A literary or dramatic work that ridicules a subject either by presenting a solemn subject in an undignified style or an inconsequential subject in a dignified style. See synonyms at caricature.
A ludicrous or mocking imitation; a travesty: The antics of the defense attorneys turned the trial into a burlesque of justice.
A variety show characterized by broad ribald comedy, dancing, and striptease.
Personally, I like the last definition!
carpenter said:A variety show characterized by broad ribald comedy, dancing, and striptease.
Personally, I like the last definition! [/B]
hmm... how do I unsubscribe from this thread before Zen Mod posts his next reply?
luvdunhill said:
hmm... how do I unsubscribe from this thread before Zen Mod posts his next reply?
Pour a glass of red wine and hope for the best!
Zen Mod said:
this thread is certainly biggest burlesca in forum ......... history
Certainly not surprising....
P.s. I don't intend to carve the Pumpkin in the near future; However this has been one of the most enjoyable threads
Vix said:
Certainly not surprising....
P.s. I don't intend to carve the Pumpkin in the near future; However this has been one of the most enjoyable threads
good one...
Zen Mod said:biggest burlesca
ZM means that at the current level of the shunty it bares little significance.
Wirewounds have less noise, are sturdier, induction or induction-free has no bearing for DC-operation.
So if you got them, sure, use them.
But if you don't, use metalfilm, ever checked how much a low power wirewound resistor costs ? (e.g Dale RS series)
jacco vermeulen said:
ZM means that at the current level of the shunty it bares little significance.
Wirewounds have less noise, are sturdier, induction or induction-free has no bearing for DC-operation.
So if you got them, sure, use them.
But if you don't, use metalfilm, ever checked how much a low power wirewound resistor costs ? (e.g Dale RS series)
carpenter said:
No kidding. Morten, you've been holding out on us...
I've only been holding out on you, all due to consideration of your weak heart and you blood pressure
Magura
Zen Mod said:
few watts ain't nutin' ............
ask your Nanny M.
Yeah we are even talking single digit watts here, no worries for quite some time.....and quite some time in this case just might be forever
Magura
carpenter said:
I can't afford Magura...
Zen Mod said:
don't worry ......... he's in your footsteps , all the time .........
Yeah, he is right at your tail.....blazing away
Woodie, repeat after me: 200mA per coil!
Magura
Magura said:
Yeah, he is right at your tail.....blazing away
Woodie, repeat after me: 200mA per coil!
Magura
what drek ?
it isn't 300?
wusssyyyyy
Magura said:
Yeah, he is right at your tail.....blazing away
Woodie, repeat after me: 200mA per coil!
Magura
All right, getting to several issues: besides my weak heart--I'll try not to stare at Mrs. Magura's pic too much. , where are you putting the chokes? Did I miss some new schematics? Are you doing something like myself in the JfetBOZ project?
- Home
- Amplifiers
- Pass Labs
- Pumpkin preamp - ordered by Steen , official making thread