easy
but I have no time right now , to construct entirely new preamp
Can 6DJ8 use +/- 35V and operating well ?
I loved 6DJ8 sound.
Can 6DJ8 use +/- 35V and operating well ?
I loved 6DJ8 sound.
no ;
6DJ8 needs at least 75V between anode and cathode , to operate properly ;
that means ( really depending of overall construction ) , that positive PSU must be greater than that , also considering nature of load ( is it CCS , gyrator , resistance , choke ) .........
so - no low voltages with tubes ....... and rare low voltage ones doesn't have most important virtues of tubes .......
that's my , modest as always , opinion
no ;
6DJ8 needs at least 75V between anode and cathode , to operate properly ;
that means ( really depending of overall construction ) , that positive PSU must be greater than that , also considering nature of load ( is it CCS , gyrator , resistance , choke ) .........
so - no low voltages with tubes ....... and rare low voltage ones doesn't have most important virtues of tubes .......
that's my , modest as always , opinion
Mybe we can use 6GM8 instead of 6DJ8 as I saw from Borbely Hybrid Line Stage !
Does his schematic look like Pumpkin ?
Mybe we can use 6GM8 instead of 6DJ8 as I saw from Borbely Hybrid Line Stage !
Does his schematic look like Pumpkin ?
no , and no
as I said - I don't like neither low voltage for tubes nor low voltage tubes
but - maybe you'll like them
2x25v 160va and 2x30v and just found they have a 2x 45v 160va are readily available.
Should I use 1 per channel?
http://www.altronics.com.au/index.asp?area=item&id=M5345
Should I use 1 per channel?
http://www.altronics.com.au/index.asp?area=item&id=M5345
Thanks Zen
reading tru the whole thread showed a link to the below R-Core. I emailed an there are still a few available. I am not sure of their quality though.
About $60 delivered so similar price to local offerings.
Hot news from THLaudio
reading tru the whole thread showed a link to the below R-Core. I emailed an there are still a few available. I am not sure of their quality though.
About $60 delivered so similar price to local offerings.
Hot news from THLaudio
Last edited:
Good ones, and look brand new btw.
The odd part is that i bought up the entire stock they said they had left, the minute i saw their ad, that was before 2010.
Need a datasheet, an image of the integrated amp they came out of, or a close-up(s) of the tranny ?
(cough, me pay less than $21, mucho less )
The odd part is that i bought up the entire stock they said they had left, the minute i saw their ad, that was before 2010.
Need a datasheet, an image of the integrated amp they came out of, or a close-up(s) of the tranny ?
(cough, me pay less than $21, mucho less )
- Home
- Amplifiers
- Pass Labs
- Pumpkin preamp - ordered by Steen , official making thread