PSB SubSonic 5i problems- no go

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
PSB Subsonic 6I

At first you should disconnect the power amp from the supplies to check whether it is the smps or a blown amp.
I had to repair some old harman kardon amp with quite similar smps - and I must say these pulse-width modulated veteran circuitry was a nightmare by design.
They blow up during power on and I had to design in some additional circuitry to prevent this from happening.
All in all, quite bad designed smps.:eek:

I have dead PSB Subsonic 6i with issues in SMPS. Is it possible to change only SMPS with any other SMPS? Do you have its schematics? any idea to repair the smps?
 

Attachments

  • 2.jpg
    2.jpg
    275.6 KB · Views: 300
  • 3.jpg
    3.jpg
    784.4 KB · Views: 291
  • 4.jpg
    4.jpg
    322.9 KB · Views: 274
  • 1.jpg
    1.jpg
    299.7 KB · Views: 334
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.