hopeing i can get all the parts in this case ill be building a pre for a friends computer. it was a video booster i could not sell on e-bay. the max plate voltage on the tube is 300v so ill would like to run it at
200v if it will work. maybe a full bridge with a 200v cap and some filter not sure. if you have a idea tell me about it.
200v if it will work. maybe a full bridge with a 200v cap and some filter not sure. if you have a idea tell me about it.
Attachments
kinda like this. but external. im going to mod out a creative sound card. and remove the preamp off the card so without a pre the sound card wont work. its worked in the past just never made em this small
http://www.aopen.com/products/mb/ax4b-533tube.htm
speakers not sure i guese it depends on the amp
http://www.aopen.com/products/mb/ax4b-533tube.htm
speakers not sure i guese it depends on the amp
Attachments
Really cute!nickgreek said:
Cheers,
nickgreek,
I'd already seen the schematic on your website, along with the internal pictures.
The power invertor for voltage step-up is interesting. How much current do you take from the computer's 12v power line?
Cheers,
Karma, sorry to hijack your thread but you must agree this is a nice idea.
Cheers,
I'd already seen the schematic on your website, along with the internal pictures.
The power invertor for voltage step-up is interesting. How much current do you take from the computer's 12v power line?
Cheers,
Karma, sorry to hijack your thread but you must agree this is a nice idea.
Cheers,
Re: now i wana make one
What circuit did you use?
Can't be ultimate, because he didn;t start with a G4 PowerMac
dave
karma said:computer preamp
What circuit did you use?
JOE DIRT® said:I love that computer case...wooooooo....that is the ultimate tweek!!!
Can't be ultimate, because he didn;t start with a G4 PowerMac
dave
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- preamp for buddys computer