Bas and mhouston, the design and build is here:
http://www.diyaudio.com/forums/tubes-valves/213947-just-what-world-needs-another-el84-amp.html
http://www.diyaudio.com/forums/tubes-valves/213947-just-what-world-needs-another-el84-amp.html
Love it!My latest project. A dual chassis phono preamp based on the JE labs circuit. Thanks guys.
Some body give me a schematic of mosfet amplifier high current thanks
This is the Valve forum; try the solid-state one.
6SL7/4x6SN7/6X5 phono stage/preamlifier.
Damn! That's nice!! I really like the lap joints in the woodwork. The component outline with the tube types indicated is a nice retro touch as well. Nice work. Thanks for sharing.
~Tom
Jadis 30 clones .. Audio8 boards
I built a couple of these . Used Tango (ISO) transformers I picked up in Tokyo recently
The boars come from audio8 they could be smaller .. I used the provided (huge ) power supply boards in one but did one on a tag board on the other.
I think Iwill provide some balanced inputs for them as I am using long lines.
I built a couple of these . Used Tango (ISO) transformers I picked up in Tokyo recently
The boars come from audio8 they could be smaller .. I used the provided (huge ) power supply boards in one but did one on a tag board on the other.
I think Iwill provide some balanced inputs for them as I am using long lines.
Attachments
MOTIP Dupli-Color.Sander'z Perfect work! What type of varnish you use?
Attachments
KEG-EAR AUDIO AMP
6L6-KT88 based amp, UL-Triode selectable. 60 watt Hammond 4.3k output iron. PCB is toner transfer method etched in a sink, brass eyelets used for all wire and underboard caps. worked with low cost 6P3S Russian 6L6 to KT88 tubes. 6550=C= were the best to my ears in triode mode. LED bias monitors on front to indicate a bias shift or bad tube. Oak chassis with 10 coats of tung oil.
6L6-KT88 based amp, UL-Triode selectable. 60 watt Hammond 4.3k output iron. PCB is toner transfer method etched in a sink, brass eyelets used for all wire and underboard caps. worked with low cost 6P3S Russian 6L6 to KT88 tubes. 6550=C= were the best to my ears in triode mode. LED bias monitors on front to indicate a bias shift or bad tube. Oak chassis with 10 coats of tung oil.
Attachments
- Home
- Amplifiers
- Tubes / Valves
- Photo Gallery