Shaan,
I’ll take a pair from that stack if some remain!
Greg
Hi Greg.
Sure. Some still remains in that stack.
Will send you invoice shortly.
I have an 2x34v 400va transformer(antek as-4434 ), I hope it will be good ... what do you think Shaan?
It will be fine. But maximum power output will be less.
Hi Shaan, I have made the payment for the shipping, could you be kind enough if you have the vertical 0.1 resistors on hand to add those to? I will pay them of course.
I am sorry but I can't send the resistors. I can only send PCBs, MOSFETs and BAV21 diodes.
Shaan,
Can Exicon ECX10N20/ECX10P20s be used in place of the 2SK1058/2SJ162 at 56v rails? I have some pairs I was going to use for a V4 build that I am hoping I could use for the V4H. If not, do you have any 2SK1058/2SJ162 pairs still available?
Thanks!
Greg
Yes Exicon works for V4H as well, I've just asked Shaan
Shaan,
Can Exicon ECX10N20/ECX10P20s be used in place of the 2SK1058/2SJ162 at 56v rails? I have some pairs I was going to use for a V4 build that I am hoping I could use for the V4H. If not, do you have any 2SK1058/2SJ162 pairs still available?
Thanks!
Greg
Hi Greg.
10n20+p20 is fine.
Hi, could we use 0.22ohm resistors instead of the 0.1? It shouldn't have much impact on the functionality from what i can tell.
Yes we can without problem.
GB Update:
Sadik - 2 PCBs + 4 PAIR MOSFET - SHIPPED
Oracle1 - 2 PCBs + 4 PAIR MOSFET - SHIPPED
J.M.K - 4 PCBS + 4 PAIR MOSFET - SHIPPED
vvs07 - 4 PCBs - SHIPPED
Vunce - 4 PCBs + 4 PAIR MOSFET ( + 4 V4 PCBs ) - SHIPPED
steefdebruijn - 2 PCBS - SHIPPED
Kheon - 4 PCB's - SHIPPED
Neurotica - 2 PCBs - SHIPPED
Arthur -6 PCBS - SHIPPED
Ajit - 2 PRE-ASSEMBLED MODULES - SHIPPING PAID
amitskamal - 1 STEREO KIT - SHIPPING PAID
outtek - 2 PCB + 4 PAIR MOSFET - SHIPPING PAID
craydive - 4 PCBS - SHIPPING PAID
PinkPink - 4 PCBs - SHIPPING PAID
CitizenKane - 4 PCBs - SHIPPING PAID
gaborbela - 2 PCBs - SHIPPING PAID
The Prof - 1 STEREO KIT - SHIPPING PAID
ejno - 2 PCBS - SHIPPING PAID
abanico - 2 PCBs + 4 PAIR MOSFETs - SHIPPING INVOICE SENT
Malvin - 2 PCBs + 4 PAIR MOSFET - SHIPPING INVOICE SENT
hallcon83 - 4 PCBs - SHIPPING INVOICE SENT
smouse - 2 PCBS - NO RESPONSE
Things are moving.
If there is a mistake in the list then please let me know. Thanks everyone for your patience.
Sadik - 2 PCBs + 4 PAIR MOSFET - SHIPPED
Oracle1 - 2 PCBs + 4 PAIR MOSFET - SHIPPED
J.M.K - 4 PCBS + 4 PAIR MOSFET - SHIPPED
vvs07 - 4 PCBs - SHIPPED
Vunce - 4 PCBs + 4 PAIR MOSFET ( + 4 V4 PCBs ) - SHIPPED
steefdebruijn - 2 PCBS - SHIPPED
Kheon - 4 PCB's - SHIPPED
Neurotica - 2 PCBs - SHIPPED
Arthur -6 PCBS - SHIPPED
Ajit - 2 PRE-ASSEMBLED MODULES - SHIPPING PAID
amitskamal - 1 STEREO KIT - SHIPPING PAID
outtek - 2 PCB + 4 PAIR MOSFET - SHIPPING PAID
craydive - 4 PCBS - SHIPPING PAID
PinkPink - 4 PCBs - SHIPPING PAID
CitizenKane - 4 PCBs - SHIPPING PAID
gaborbela - 2 PCBs - SHIPPING PAID
The Prof - 1 STEREO KIT - SHIPPING PAID
ejno - 2 PCBS - SHIPPING PAID
abanico - 2 PCBs + 4 PAIR MOSFETs - SHIPPING INVOICE SENT
Malvin - 2 PCBs + 4 PAIR MOSFET - SHIPPING INVOICE SENT
hallcon83 - 4 PCBs - SHIPPING INVOICE SENT
smouse - 2 PCBS - NO RESPONSE
Things are moving.
If there is a mistake in the list then please let me know. Thanks everyone for your patience.
Last edited:
Mr Shaan,
Is the amplifier pcb still left with you. I am from India. What is the cost of one bare pcb?
Cost of a pair of MOSFET please.
PM sent.
Hi Shaan,
Please update my request to assembled modules from components + PCB. Already, paid extra cost please check pm.
Hi Amit.
Payment received. Your modules are being assembled now.
Thank you.
- Home
- Group Buys
- PeeCeeBee V4H GB