-
These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.
PeeCeeBee V4 GB!
- Thread starter shaan
- Start date
Slowly finishing my PeeCeeBee.
Used Alfet laterals for exit and ksc5303 ksa1381 for VAS.
Also polymer capacitors for feedback and panasonic FR for the rest.
One wrong resistor in one channel got me puzzled for a couple of days, but finally found it!
Will use a capacitor multiplier that I had laying around, for power supply.
Thanks for a fine amp Shaan!
Used Alfet laterals for exit and ksc5303 ksa1381 for VAS.
Also polymer capacitors for feedback and panasonic FR for the rest.
One wrong resistor in one channel got me puzzled for a couple of days, but finally found it!
Will use a capacitor multiplier that I had laying around, for power supply.
Thanks for a fine amp Shaan!
Attachments
GB3 Update:
gtose - 4 PCBs - paid
pieter t - 4 PCBs - paid
fredlock - 2 PCBs - paid
loafimus - 2 PCBs - paid
RomanM - 2 PCBs - paid
Zero Cool - 2 PCBs - paid
kpsthakur - 2 PCBs - paid
CitizenKane - 4 PCBs - paid
yyzz - 4 PCBs + 2x K1058 + 2x J162 - paid
zebulo - 2 PCBs + 2x K1058 + 2x J162 - paid
pluplog - 2 PCBs + 2x K1058 + 2x J162 - paid
finneybear - 2 PCBs + 2x K1058 + 2x J162 - paid
gabbar - 2 PCBs + 4x K1058 - paid
34 PCBs booked so far. Only 6 remaining.
gtose - 4 PCBs - paid
pieter t - 4 PCBs - paid
fredlock - 2 PCBs - paid
loafimus - 2 PCBs - paid
RomanM - 2 PCBs - paid
Zero Cool - 2 PCBs - paid
kpsthakur - 2 PCBs - paid
CitizenKane - 4 PCBs - paid
yyzz - 4 PCBs + 2x K1058 + 2x J162 - paid
zebulo - 2 PCBs + 2x K1058 + 2x J162 - paid
pluplog - 2 PCBs + 2x K1058 + 2x J162 - paid
finneybear - 2 PCBs + 2x K1058 + 2x J162 - paid
gabbar - 2 PCBs + 4x K1058 - paid
34 PCBs booked so far. Only 6 remaining.
GB3 Update:
gtose - 4 PCBs - paid
pieter t - 4 PCBs - paid
fredlock - 2 PCBs - paid
loafimus - 2 PCBs - paid
RomanM - 2 PCBs - paid
Zero Cool - 2 PCBs - paid
CitizenKane - 4 PCBs - paid
yyzz - 4 PCBs + 2x K1058 + 2x J162 - paid
zebulo - 2 PCBs + 2x K1058 + 2x J162 - paid
pluplog - 2 PCBs + 2x K1058 + 2x J162 - paid
kpsthakur - 2 PCBs + 2x K1058 + 2x J162 - paid
finneybear - 2 PCBs + 2x K1058 + 2x J162 - paid
gabbar - 2 PCBs + 4x K1058 - paid
Done. I'm sorry for the discrepancy. Thanks for your patience.
gtose - 4 PCBs - paid
pieter t - 4 PCBs - paid
fredlock - 2 PCBs - paid
loafimus - 2 PCBs - paid
RomanM - 2 PCBs - paid
Zero Cool - 2 PCBs - paid
CitizenKane - 4 PCBs - paid
yyzz - 4 PCBs + 2x K1058 + 2x J162 - paid
zebulo - 2 PCBs + 2x K1058 + 2x J162 - paid
pluplog - 2 PCBs + 2x K1058 + 2x J162 - paid
kpsthakur - 2 PCBs + 2x K1058 + 2x J162 - paid
finneybear - 2 PCBs + 2x K1058 + 2x J162 - paid
gabbar - 2 PCBs + 4x K1058 - paid
Done. I'm sorry for the discrepancy. Thanks for your patience.
![IMG_20171103_182551[1].jpg](/community/data/attachments/596/596649-588f2ed443f4e52552b2bb6256f3f50b.jpg)
![IMG_20171103_182650[1].jpg](/community/data/attachments/596/596677-ce628fb1d5be4a3cc78b175757e8e482.jpg)
Hi Shaan,
Correct me if I'm wrong, you mentioned that the 2sk/J output transistors can only accommodate max DC voltage up to +/- 35V Vdc. Would the Exicon output transistors will work with +/-45 Vdc? If so, I would like to use that power supply since I have it laying around for a long time.
Correct me if I'm wrong, you mentioned that the 2sk/J output transistors can only accommodate max DC voltage up to +/- 35V Vdc. Would the Exicon output transistors will work with +/-45 Vdc? If so, I would like to use that power supply since I have it laying around for a long time.
