Are you looking for a layout to make your own PCB?
http://www.jeanyvesmartin.com/schemas-amplificateur-tda-7294-a5.html
Or for a PCB to buy?
http://www.diy-selbstbau.de/produkte/a80-en.htm
Did you try the search button?
http://www.jeanyvesmartin.com/schemas-amplificateur-tda-7294-a5.html
Or for a PCB to buy?
http://www.diy-selbstbau.de/produkte/a80-en.htm
Did you try the search button?
I used the PCB in the datasheet and it worked fine and was an easy to make and etch PCB... I have a ready to etch Image of this PCB design if you want it ....
If you look on e-bay you can buy a stereo TDA7293 Kit with all Parts and PCB for about $23 US which is about the price of just the two TDA7293 chips....
Cheers
If you look on e-bay you can buy a stereo TDA7293 Kit with all Parts and PCB for about $23 US which is about the price of just the two TDA7293 chips....
Cheers
Thnaks for your help !
i find the kit on Ebay :
http://cgi.ebay.com/TDA7293-Hi-Fi-P...68380&_trksid=p3286.m20.l1116#ShippingPayment
On the photo , we can see a " stereo model " , but in the description it's not mentioned, so I well send a mail to the seller.
On this kit , probably , this isn't the best components (MKP, ceremaiq resistor same Vishay )
So probably , i will buy the kit and modify some components
+
i find the kit on Ebay :
http://cgi.ebay.com/TDA7293-Hi-Fi-P...68380&_trksid=p3286.m20.l1116#ShippingPayment
On the photo , we can see a " stereo model " , but in the description it's not mentioned, so I well send a mail to the seller.
On this kit , probably , this isn't the best components (MKP, ceremaiq resistor same Vishay )
So probably , i will buy the kit and modify some components
+
Hi ,Yes it is a stereo model but can also be wired in Bridge mode or Paralell for mono, the Kit comes with instructions on how to do this .....
That is the same one I just bought , it hasn"t come yet though... I also bought the power supply board which was $6 and comes with the bridge rectifier and terminal blocks and some smaller value caps and a couple resistors (Snubber ?) but doesn"t come with the big PSU Caps but still a damn good deal for $6 ..... His kits are the least expensive out of all the kits I have looked at I just hope they aren"t cheap....
Cheers
That is the same one I just bought , it hasn"t come yet though... I also bought the power supply board which was $6 and comes with the bridge rectifier and terminal blocks and some smaller value caps and a couple resistors (Snubber ?) but doesn"t come with the big PSU Caps but still a damn good deal for $6 ..... His kits are the least expensive out of all the kits I have looked at I just hope they aren"t cheap....
Cheers
High resolution Circuits please
Could you please upload the better quality images of the same. These are ok..but a bit blur and coudnt have a clear view.Hi see the schematic you can find on ebay
works better with a 6922 in cathode follower on input to build
a perfect hybrid
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- PCB for TDA7293