This is a successful end of the new 330 which I have finished with aid of Mr. Dudek himself.
I would like to thank him a lot for his willingness and time which he devoted to me and above all for the great amplifier which he had constructed.
Thanks a lot!
Very nice Page.P!
Very unusual way of cooling the TO-3 Hitachi devices you have there, how thick is the aluminium plate on which the TO-3 are attached to?
I had a bunch of those TO-3 Hitachis but changed with a guy from NZ and got 1,5 times as many of the 2sj162 2sk1058 in exchange, some are crazy in those old cans.
Cheers Michael
Sorry about invisible picture of DPA330.
This should work better:
This should work better:
An externally hosted image should be here but it was not working when we last tested it.
And my DPA380 on old PCB:
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Regarding parameters, this was DPA380 THD vs. frequency, 8ohm load, 1dB below clipping:
I judge the quality of amplifiers by delays 100kHz, which is to please at 100kHz the amplifier output stage?
Thank
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- Pavel Dudek's (Upupa Epops) amplifiers II