open baffle plan for FE206E

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Well, now, a bit more detail might be nice:

- for a 250 hz cut-off, make it 12" square (see attached graph).
- cut the appropriately sized hole in it and mount the 206.

:)
 

Attachments

  • open-baffle-size-vs-freq.gif
    open-baffle-size-vs-freq.gif
    29.2 KB · Views: 1,084
Kofi Annan said:
How low can an OB design go for the 206E and how big would the OB B?

I B C N U L8R, G!

Kofi

I really don't know, but you raise a good point. Due to it's quite low Q, the 206E may not go all that low in an OB. I would think that 250 Hz would be possible, but I'm really guessing.

Given this, my earlier statement of 12 inches is probably way too small. But then, I wasn't being all that serious anyway...

I wonder if the crossover shown in the Basszilla link raises the Q.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.