The shark has to move forward.
Gesendet von iPhone mit Tapatalk
DRC/ERC done.
Someone to check pinning (spacing) of the transformer (I found TRIAD equivalent with different spacing for pin 1 and 2)?!
We have to agree about colours for silkscreen and soldermask.
Here the pair prices, all boards ENIG, 2x35µm, E-tested (without shipping):
- green/white --> 15€
- blue/white or black/white --> 17€
- red/black or white/black --> 19€
Jean-Paul
Someone to check pinning (spacing) of the transformer (I found TRIAD equivalent with different spacing for pin 1 and 2)?!
We have to agree about colours for silkscreen and soldermask.
Here the pair prices, all boards ENIG, 2x35µm, E-tested (without shipping):
- green/white --> 15€
- blue/white or black/white --> 17€
- red/black or white/black --> 19€
Jean-Paul
Attachments
-
M2-V1-SCH.pdf44.1 KB · Views: 221
-
M2-V1-PBA-TOP.pdf77.5 KB · Views: 224
-
M2-V1-Render-Green_White.jpg105.8 KB · Views: 1,211
-
M2-V1-Render-Blue_White.jpg107.2 KB · Views: 1,201
-
M2-V1-Render-Red_Black.png910 KB · Views: 1,199
-
M2-V1-Render-Black_White.png968.4 KB · Views: 1,143
-
M2-V1-Render-White_Blxk.png968.5 KB · Views: 1,020
DRC/ERC done.
Someone to check pinning (spacing) of the transformer (I found TRIAD equivalent with different spacing for pin 1 and 2)?!
Not sure this is what you meant: I don't have eagle so I took the measurements off a 1:1 print-out. There, the pin spacings (within my accuracy) match the drawing on the Edcor web-site. Also the outer dimensions of the transformer and the TEKO housing seem OK.
... all boards ENIG ...
While ENIG looks nice and is easier to solder, I would prefer HASL. It's cheaper, and does not have the risk of "Gold Embrittlement of Solder Joints".
Gold Embrittlement of Solder Joints
- Home
- Amplifiers
- Pass Labs
- Official M2 schematic