Perhaps this will help, here's an example of a system using the 4540ND with the DDS ENG-1 waveguide
http://www.htguide.com/forum/showthread.php4?t=23598&page=1&pp=35
http://www.htguide.com/forum/showthread.php4?t=23598&page=1&pp=35
You need a measurement of the compression driver with the horn you are going to use to do the compensation. It would also my be helpful if you have an impedence and phase plot of the driver with the horn installed as well.
At the very least we would need to know what horn you want to use so if someone has done this before they can help you out.
Rob
At the very least we would need to know what horn you want to use so if someone has done this before they can help you out.
Rob
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.