Hi!
Is not the same Echo VS Spring-loaded reverb!
Regards zeoN_Rider
wg_ski said:Spring-loaded reverb tank. Parts Express has some in their latest flyer - about $20. It will take a single transistor to drive, and one to receive.
Is not the same Echo VS Spring-loaded reverb!
Regards zeoN_Rider
jackinnj said:use a length of garden hose with a pair of transducers on each end
Yes... at 340m/s, you need 68 meters of garden hose for 0.2 sec. delay...
with some valves you could also have a great variable delay echo...
acid_k2 said:with some valves you could also have a great variable delay echo...
Could you elaborate on this?
How about a 1024-stage BBD using tubes?
More seriously though, many studios used to use 'plate echo' devices - which have quite an OK 'sound', but they take up a LOT of space.
Essentially what you need is a large sheet of thin sheet metal - like 6x6 feet.
I'd agree, tape is the easiers & cheapest. Cassette not easy to modify, but an old 3-head reel-to-reel is a pretty much ready made echo unit.
More seriously though, many studios used to use 'plate echo' devices - which have quite an OK 'sound', but they take up a LOT of space.
Essentially what you need is a large sheet of thin sheet metal - like 6x6 feet.
I'd agree, tape is the easiers & cheapest. Cassette not easy to modify, but an old 3-head reel-to-reel is a pretty much ready made echo unit.
Steerpike said:How about a 1024-stage BBD using tubes?
They have once across the Isar -- if you ever get to Munich go to the Deutsches Museum -- http://www.deutsches-museum.de/
The Mighty Echoplex...
http://cgi.ebay.com/ECHOPLEX-EP4_W0...ryZ41415QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ECHOPLEX-EP4_W0...ryZ41415QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
why not an electromecanical delay?
build not with ICs, but with magnetic levels on some magnetic fields on the periphery of a big rotating disk.
with the position of the read and write heads on the disk and the speed of the disk, you'll obtain a lot of possible delays.
don't use magnetic tape but magnets on a rotating axle, with blocking mecanism.
magnetic orientation is set by a very strong electromagnet.
it needs to have a lot of magnets to make the 44100 samples per seconds.
and all the electronics is only the read & write amplifiers, with optional speed & position control made with µP and stepper motors.
build not with ICs, but with magnetic levels on some magnetic fields on the periphery of a big rotating disk.
with the position of the read and write heads on the disk and the speed of the disk, you'll obtain a lot of possible delays.
don't use magnetic tape but magnets on a rotating axle, with blocking mecanism.
magnetic orientation is set by a very strong electromagnet.
it needs to have a lot of magnets to make the 44100 samples per seconds.
and all the electronics is only the read & write amplifiers, with optional speed & position control made with µP and stepper motors.
edfed said:why not an electromecanical delay?
build not with ICs, but with magnetic levels on some magnetic fields on the periphery of a big rotating disk.
Are you talking about an oil can delay?
i don't know, i speak about a fun idea, that's all.
a delay using hard drive plates and heads could be good too.
but it will not be as simple to do as it seems.
in theory, the disk is the memory, the heads are the pointers in relative time.
the relative position of heads will give the delay and speed of disk will give the time.
for sure it is possible to do that, but how many transistors needed to make the control circuit???
i found this link... very interresting.
http://www.ultrajosh.com/tubeamp/2003_05_01_archive.html
thank's teemuk !
enjoy
a delay using hard drive plates and heads could be good too.
but it will not be as simple to do as it seems.
in theory, the disk is the memory, the heads are the pointers in relative time.
the relative position of heads will give the delay and speed of disk will give the time.
for sure it is possible to do that, but how many transistors needed to make the control circuit???
i found this link... very interresting.
http://www.ultrajosh.com/tubeamp/2003_05_01_archive.html
thank's teemuk !
enjoy
In the 1960s and 70s, hard disc analogue video recorders were used to give delays or effects such as slow motion or action replays of otherwise live sports event broadcasts.
http://www.labguysworld.com/MVR_100S-2A.htm
http://www.labguysworld.com/MVR_100S-2A.htm
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- need echo circuit schematic does not have an ic in it