On Pins 1 and 7 of the TL074C I get -0.16 volts So no real DC on the output pins ..
Pins 8 and 14 rest at 0.00 volts
If i turn the Pots down the DC on pins 1 and 7 drops to 0.00 volts
Also when i turn either the gain or crossover pot up with a speaker connected the amp will start drawing excessive current
Pins 8 and 14 rest at 0.00 volts
If i turn the Pots down the DC on pins 1 and 7 drops to 0.00 volts
Also when i turn either the gain or crossover pot up with a speaker connected the amp will start drawing excessive current
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- MTX 4002