Ok - I don't see why not only one miniDIGI could be used. I2S is only for very short cable distance, so if the miniDSP/MiniDIGI combo are not stacked, then you have to use SPDIF between the MiniDSP's and therefore two MiniDIGI boards.
But I will recommend to ask the development teamt them self. They usually answere within a couple of days.
But I will recommend to ask the development teamt them self. They usually answere within a couple of days.
You can order the custom jumper cables by email. But the stack was never designed with 1 x digi and 2 x DSP, so you will have stereo with digital in but when you switch to analog only one channel will work. I don't know of any way to fix this. You may be better off buying the 2 x 8.
Dean
Dean
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.