Euvl are you willing to share the details of the venturi used for the mid-range enclosure. Curious if the inside is stepped or sanded to a taper, what length and configuration (size of rings). I plan on building a pair of speakers using cell drivers with a layered construction cabinet that this venturi concept would incorporate well.
The Venturi design is the intellectual property of Joachim Gerhard.
So you should really ask him.
In our implementation, the inside contour is CNC machined, so not stepped.
The length equals the depth of the enclosure. The major dimensions of the enclosure is the same as in Marc's build.
The major diameter matches that of the CELL mid-range.
And the total volume is 2 litres.
From that you can pretty much work out every detail you need, even without asking Joachim.
Patrick
So you should really ask him.
In our implementation, the inside contour is CNC machined, so not stepped.
The length equals the depth of the enclosure. The major dimensions of the enclosure is the same as in Marc's build.
The major diameter matches that of the CELL mid-range.
And the total volume is 2 litres.
From that you can pretty much work out every detail you need, even without asking Joachim.
Patrick
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.