These drivers are fun to work with, big magnet and long throw VC. I had one suspend on a cord the other day and did a generator sweep, pretty darn smooth (no mic). 25 to 80hz anyway; that’s all I wanted to know and didn’t go higher.
I bought 10 about 10 years ago, most of them are still working. I let friends/family use some of them and couple of the spiders came lose. But that said, I think the spider is a little taller/bigger now AND glued/repaired the ones that came lose.
They had a one year warranty back then; it may only be 30days now.
I think they came lose in the first place because they were playing them too loud, and flipping through channels, over extending the cone.
I never had a problem here; been using some for the 10 years and they work/look fine.
Can't be long now Kornnylike.
I bought 10 about 10 years ago, most of them are still working. I let friends/family use some of them and couple of the spiders came lose. But that said, I think the spider is a little taller/bigger now AND glued/repaired the ones that came lose.
They had a one year warranty back then; it may only be 30days now.
I think they came lose in the first place because they were playing them too loud, and flipping through channels, over extending the cone.
I never had a problem here; been using some for the 10 years and they work/look fine.
Can't be long now Kornnylike.
getting real close .
you can test without the lid ,(you lose some 35 hz )
I have some screw holes to seal before I fire it up.
i fired it up
So last night I ran some 35hz to a 100hz through the bass horn it sound so sweet. I also rrun a frequencey sweep through the bass horn you can hear the difference as the frequencey change. When I get the spl meter I will put up some numbers. This bass horn sounds really good for the size speaker it use.
Thanks to epa and jbell
Epa check your pm
So last night I ran some 35hz to a 100hz through the bass horn it sound so sweet. I also rrun a frequencey sweep through the bass horn you can hear the difference as the frequencey change. When I get the spl meter I will put up some numbers. This bass horn sounds really good for the size speaker it use.
Thanks to epa and jbell
Epa check your pm
good news
measurments wood be nice for comparison,but the most importent question is ,do you like what you hear.
atm i have a cold so the other one have to wait a few days.
to answer your q about the tapered pannels,just cut the tapered bit of and leave it like that.
or replace the tapered parts wit foam(roofmate or such)
measurments wood be nice for comparison,but the most importent question is ,do you like what you hear.
atm i have a cold so the other one have to wait a few days.
to answer your q about the tapered pannels,just cut the tapered bit of and leave it like that.
or replace the tapered parts wit foam(roofmate or such)
ive been simming a bit ,i think 46"h makes the horn mouth to small
is the widht oke as it is now?
you can make the width a little wider it is a bit tight when screwing down the speakers. 22" width should be good.
Last edited:
46" high isn't good ,the mouth becomes to small
basicly if you want 4 speakers in it wil have to become about twice as big as this one.
why not stack 2 of these on the side(or 3 or 4)
4 wil be 6' wich is perfect for tops over the audiance
wheels on this one and example with 4
basicly if you want 4 speakers in it wil have to become about twice as big as this one.
why not stack 2 of these on the side(or 3 or 4)
4 wil be 6' wich is perfect for tops over the audiance
wheels on this one and example with 4
Last edited:
46" high isn't good ,the mouth becomes to small
basicly if you want 4 speakers in it wil have to become about twice as big as this one.
why not stack 2 of these on the side(or 3 or 4)
4 wil be 6' wich is perfect for tops over the audiance
wheels on this one and example with 4
what if we make it wider would that make the mouth bigger
epa;279346 i have a cold [/QUOTE said:epa how about you get better first then we continue.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- Mcm 8" 55-2421 Ts parameter