Just leave it be.
The 50W loss depends mainly on the power transformer.
Using an IM analyzer I have found that only 10mA per output gives the lowest distortion on those. That would be about 4.92W (12 outputs at 40V) plus the front end, which is just a few mA at low voltage.
The 50W loss depends mainly on the power transformer.
Using an IM analyzer I have found that only 10mA per output gives the lowest distortion on those. That would be about 4.92W (12 outputs at 40V) plus the front end, which is just a few mA at low voltage.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.