Hi,
I feel that 300V is no safer then >1KV, they will kill any careless builder the same .... SS at +/-20V should be safe enough...
At 900++, still be able to get about 100W.
or, a pair of 6146 pentode will put out 100W at 600~700Watt..
When we go >15W, any tube will be consuming considerable amunt of filament power...
Power Efficiency? Definately not in tube's good book.....
Cheers
I feel that 300V is no safer then >1KV, they will kill any careless builder the same .... SS at +/-20V should be safe enough...
At 900++, still be able to get about 100W.
or, a pair of 6146 pentode will put out 100W at 600~700Watt..
When we go >15W, any tube will be consuming considerable amunt of filament power...
Power Efficiency? Definately not in tube's good book.....
Cheers
I feel that 300V is no safer then >1KV, they will kill any careless builder the same
I disagree. There is certainly no room for carelessness in building any vacuum tube gear and of course a 300v shock can be fatal. However, special materials and techniques are required for higher voltages like >1kv. Things you might 'get away with' at 300v could be disastrous at 1kv.
many moons ago there was a thread called EL34 Schematic Confusion there are a buch of schematics posted there, here is the link
http://www.diyaudio.com/forums/showthread.php?s=&threadid=69042&highlight=
http://www.diyaudio.com/forums/showthread.php?s=&threadid=69042&highlight=
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.