This link shows what I am looking for except this one is too big.
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=262-036
Anyone have a source for something like this but under 2.75" height?
A circular dish would be OK too if it's under 2.75" diameter.
Ideally it would be drilled out for mounting a Speakon jack like the one in the link but a blank dish would be fine.
Any help or ideas appreciated
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=262-036
Anyone have a source for something like this but under 2.75" height?
A circular dish would be OK too if it's under 2.75" diameter.
Ideally it would be drilled out for mounting a Speakon jack like the one in the link but a blank dish would be fine.
Any help or ideas appreciated
Remember that the Speakon cut out is the same as the standard 'D' type cut out used for many Neutrik connectors, including XLR's - so you should be able to find something.
In the UK Penn Fabrications make a variety - and they are the same company that you have found in the USA.
Best of luck!
In the UK Penn Fabrications make a variety - and they are the same company that you have found in the USA.
Best of luck!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.