so i built the nested lme49600 according to the datasheet, works well as a buffer, but when i try to connect it at the end of a tda1543 dac with dc offset at output (2v) the buffer doesn't work. i'm using ne5532 as the opamp. i thought these things were suppose to be able to handle dc offsets?
this is the circuit i'm using, at 5x gain
this is the circuit i'm using, at 5x gain
this is the circuit i'm using, at 5x gain
What power supply rail voltages are you using?
The +2VDC input offset becomes +10VDC at the output.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.