50%, 30% and 20% is as good as place as any to start.
But note that as you can make mids and treble much more
efficient than the bass units in an active 3-way, the actual
amplifier powers needed can be very different from the above.
Running the mids down to ~250Hz sounds more sensible to me.
sreten.
But note that as you can make mids and treble much more
efficient than the bass units in an active 3-way, the actual
amplifier powers needed can be very different from the above.
Running the mids down to ~250Hz sounds more sensible to me.
sreten.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.