Jordan JX92S TL or vented enclosure?

[Colin]

Has anyone built the vented version of the JX92S enclosure on the Jordan site? It is shown at

www.ejjordan.co.uk/enclosures.html

I realise there a number of you who have built the TL enclosure - plus a few commercial versions of it but any feedback on the vented cabinet would be appreciated.

Colin

 

[GM]

Don't know anyone, but FWIW here's a thread about the ML-TL I designed and JF built/compared to Jim Griffin's 7L/55Hz BR w/BSC:

http://f18.parsimony.net/forum31999/messages/55133.htm

GM

 

[Chingachgook]

I am also very interested in building the vented cabinet - as the TL (I have heard) has a bit more distortion at the low end.

I would be interested in anything you find on the vented configuration.

That box looks great though huh?

 

[Variac]

The people at Pass Labs are going to post the plans for a horn based on a Jordan driver in the next few weeks. Might be worth looking into. Sometimes they take a few months though to post things...

www.passdiy.com

 

[stokessd]

I've got a pair of Jordan JX-92's in a small floorstanding TL, I like them for casual listening:

http://quadesl.com/tidytl.shtml

Sheldon

 

[Variac]

Sheldon,
Those are what I also envisioned when I saw the Jordans-
Tiny innofensive towers. if I wanted to make a push-push (bipole) version with a driver facing to the front and one to the back, would I just double the cross sectional area of the transmission line and leave the length the same? I realize they wouldn't then be quite as tidy, but I could put them between my living and dining areas and get sound in both, as well as counteracting baffle step problems.
Very pretty

 

[Colin]

Thanks for the info so far. I'll certainly keep an eye on the Pass horn idea. (zHorn hasve also produced a small horn with the JX92S).

Ted Jordan himself is a long-standing supporter of properly designed vented cabinets, and as everyone else seems to be making the TL, I thought I'd give it a go.

Colin

 

[planet10]

if I wanted to make a push-push (bipole) version with a driver facing to the front and one to the back, would I just double the cross sectional area of the transmission line and leave the length the same?

Yes.

dave