some changes for another DIYer
for those orphan JFETs with weird pin outs. In my little brain it seems like cover every three pin Jfets out there( I understand the pins are reversible for source and drain)
Nice contributions so far !
please update at passlab any specials you have?
Any interest in getting 2OZ copper pads? it is not possible to get just the smd pads thick
From my diy board that area of PCB going to see a lot of rough use with changing jfets ,forceps knicks etc.2oz will last longer.
Of course that will make the price go up by 1$ or so. Can do it if there is enough interest. I am fine with 1 oz pad. But for power users if any.just throwing out there.
for those orphan JFETs with weird pin outs. In my little brain it seems like cover every three pin Jfets out there( I understand the pins are reversible for source and drain)
Nice contributions so far !
please update at passlab any specials you have?
Any interest in getting 2OZ copper pads? it is not possible to get just the smd pads thick
From my diy board that area of PCB going to see a lot of rough use with changing jfets ,forceps knicks etc.2oz will last longer.
Of course that will make the price go up by 1$ or so. Can do it if there is enough interest. I am fine with 1 oz pad. But for power users if any.just throwing out there.
Attachments
Last edited:
tubesguy (US): 1 x assembled.
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)
tubesguy (US): 1 x assembled.
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)
kevinheem (US): 1 x assembled
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)
kevinheem (US): 1 x assembled
tubesguy (US): 1 x assembled.
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)
kevinheem (US): 1 x assembled
chede (Europe) 1 kit
pchw (US): 2 kits.
merlin el mago( Europe) : 1 x assembled.
ticknpop (Canada): 3 kits
pcgab (US): 1 kit
gwrskien (NO): 2x kits
ZUM911: 2 kits
rredline (Singapore): 1 PCB
savvas: 1 kit
Praudio: 1 pcb (Canada)
SRMcGee: 1 kit (US)
ymwong: 1 kit (US)
spaceistheplace: 1 x assembled.
Malvin: 1 kit (US)
mravinsky (Europe): 1 assembled
palmito: 1 kit (US)
kevinheem (US): 1 x assembled
chede (Europe) 1 kit
IMPORTANT
Guys please pay attention
Count of PCB limited to 20 for now and it seems we have 20(weight increase may change shipping costs).
Above 20 requests will need to pay for that cost (Shared with all request above 20 if there are enough volume)if they want it through this buy.Else feel free to arrange a group buy. I will give my gerbers to you.
Can't offer assembled PCBs.Will honor the initial promised 2!
Kits and PCBs together 20 requests ONLY, WHICHEVER is earliest.Kits price calculated around 6$,plus paypal and shipping.
Please calculate the shipping from US ZIP 20902 USPS only using your choice(expedited vs regular) and include that in paypal message when you send money.
PCB price 2$ if we go with 1oz traces. paypal plus shipping.
Also who are all up for 2oz copper PCB (may last longer if you are matching a lot).I will do only if majority agrees as the price will go up by 1$shipping may too as weight goes up.have to look.
I can get you jumpers in the kit if you pay 1$ extra, else use copper wire.
Insulated Shorting Link - D3087-99 |
Harwin.
Guys please pay attention
Count of PCB limited to 20 for now and it seems we have 20(weight increase may change shipping costs).
Above 20 requests will need to pay for that cost (Shared with all request above 20 if there are enough volume)if they want it through this buy.Else feel free to arrange a group buy. I will give my gerbers to you.
Can't offer assembled PCBs.Will honor the initial promised 2!
Kits and PCBs together 20 requests ONLY, WHICHEVER is earliest.Kits price calculated around 6$,plus paypal and shipping.
Please calculate the shipping from US ZIP 20902 USPS only using your choice(expedited vs regular) and include that in paypal message when you send money.
PCB price 2$ if we go with 1oz traces. paypal plus shipping.
Also who are all up for 2oz copper PCB (may last longer if you are matching a lot).I will do only if majority agrees as the price will go up by 1$shipping may too as weight goes up.have to look.
I can get you jumpers in the kit if you pay 1$ extra, else use copper wire.
Insulated Shorting Link - D3087-99 |
Harwin.
Last edited:
With Nikon, it clearly exceeded 20pcb if everyone who signed up still wants it. I am thinking should it be a group buy.
Nikon talk to Merlin about coordinating in Europe. Not sure about your customs issues.
Only 3-4 out of 20 wants 2 Oz copper , then may be not. Also only one wants a dedicated jumper in kit.
Nikon talk to Merlin about coordinating in Europe. Not sure about your customs issues.
Only 3-4 out of 20 wants 2 Oz copper , then may be not. Also only one wants a dedicated jumper in kit.