It should be noted that Bud Purvine's patented EnABL process works very well indeed on the CSS drivers, including the new SDX7.
However, great care needs be taken to avoid contamination of the gap between the phase plug and point at which the voice coil former attaches to cone, particularly on the FR & WR125
However, great care needs be taken to avoid contamination of the gap between the phase plug and point at which the voice coil former attaches to cone, particularly on the FR & WR125
marchel said:I just recently recieved a pair of CSS FR125, And on the label there is written "XBL2 tm ENABLED".
It is confusing. Here it is a verb referring to the existance of the XBL motor.
dave
CSS/XBL said:Hi,
Dave is correct; I started using the term before I even knew about Bud's process. I could probably change it in future.
Bob
OTOH, if you kept that description, then modified drivers could be XBL^2 Enabled^2
chrisb said:
OTOH, if you kept that description, then modified drivers could be XBL^2 Enabled^2
Just what I was thinking! LOL
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Full Range
- Is the CSS FR125 Enabled or not?