Hi,
Also a couple of schematics for line preamps on Patrick Turners Web site. See link below.
miscellaneous-schematics2
{Note page down to pre-amp section right at the bottom of the web page}
Cheers,
Colin
Also a couple of schematics for line preamps on Patrick Turners Web site. See link below.
miscellaneous-schematics2
{Note page down to pre-amp section right at the bottom of the web page}
Cheers,
Colin
Thank you all!
Im reading about Aikido at the moment, and i have a question. If i understood well, I can use different tubes for input to achieve more or less gain without changeing passive elements?
I know i should change the filament voltage depending on type of a particular tube, but the catode/anode ressistors remains same?
http://www.tubecad.com/Product_PDFs/...ereo_Rev_C.pdf
Im reading about Aikido at the moment, and i have a question. If i understood well, I can use different tubes for input to achieve more or less gain without changeing passive elements?
I know i should change the filament voltage depending on type of a particular tube, but the catode/anode ressistors remains same?
http://www.tubecad.com/Product_PDFs/...ereo_Rev_C.pdf
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- In a search for a 6CG7 line stage schematic