Nigel Goodwin said:It's usually just the small drive belt slipping.
I only see one belt in CDP and it seems ok but ….
Attachments
Nigel Goodwin said:If it's not the belt slipping then it's usually the limit switch.
How can I find limit switch without service manual?
Katapum said:
How can I find limit switch without service manual?
By the obvious switch that the mechanism hits!
Nigel Goodwin said:
By the obvious switch that the mechanism hits!
I´ll try to find it.
Thanks Nigel Goodwin.
Hi,Katapum said:Hi,
Sometimes when I push close key cd tray close and open again. How can I fix it?
Katapum
Where can I find CXA1291P datasheets? What’s for CXA1291P chip?
Attachments
The IC appears to be dual operational amplifier, designed for "higher currents" probably around 100 to maybe 200mA to drive the motors. The Vcc and Vee are probably of larger area directly soldered to PCB tracks for cooling. You don’t really need data sheet to fault find - all the values you need are included in the service manual.
Good luck,
Boky
Good luck,
Boky
tricomp said:Hi Katapum,
I just saw this post today.
I can send you the service-manual by e-mail if you give me your e-mail address.
...but Nigel Goodwin is right, it's the tray-in switch most likely that gives these problems.
Kind regards,
/tri-comp
Tri-comp
gbiker said:hi everyone,
I woule like to know What dac is it in sony cdp-m26
cxd1161p
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Digital Source
- How can I fix my cd player Sony CDP-M26?