Hello everyone!
I'm trying to make the transition from car audio into home audio. The car is a nasty place to try to reproduce music truthfully...
anyways, I have a pair of Aurum Cantus G2 ribbons I'd like to put to use. I have not used them yet, so I dont even know much about them at all.
Unfortunately, this is all I have. I tried searching for proven designs using this tweeter, but was unable to come to any.
Can someone help me out to get into home audio ???
Thanks, Andres.
I'm trying to make the transition from car audio into home audio. The car is a nasty place to try to reproduce music truthfully...
anyways, I have a pair of Aurum Cantus G2 ribbons I'd like to put to use. I have not used them yet, so I dont even know much about them at all.
Unfortunately, this is all I have. I tried searching for proven designs using this tweeter, but was unable to come to any.
Can someone help me out to get into home audio ???
Thanks, Andres.
Maybe its because most diy with ribbon is made with Fountec
Like this one is
http://www.troelsgravesen.dk/W15_Neo3.htm
Should I use a ribbon like yours, I would think in the lines of a widerange driver with high xo point
Cant help but showing his latest
http://www.troelsgravesen.dk/ektagrande.htm
Like this one is
http://www.troelsgravesen.dk/W15_Neo3.htm
Should I use a ribbon like yours, I would think in the lines of a widerange driver with high xo point
Cant help but showing his latest
http://www.troelsgravesen.dk/ektagrande.htm
Well, dont worry about boring anyone ... you are here, thats a begin, right
You have a very nice ribbon and want to use it and learn some, and want good honest sound ... I wont confuse you already with suggestions, but rather point you in the direction where I think this ribbon is best used
I suggest you search threads with MLTL or BIB ... I think its a good place to start
http://www.quarter-wave.com/index.html
btw ... AN 12" fullrange seems hot at the moment, but maybe a bit difficult ... but there is lots of information and friendly, dedicated and helpfull people in the fullrange threads
And you might also be interested in this thread ... your ribbon might be useable there too, but could be tricky
http://www.diyaudio.com/forums/showthread.php?s=&threadid=106603
You have a very nice ribbon and want to use it and learn some, and want good honest sound ... I wont confuse you already with suggestions, but rather point you in the direction where I think this ribbon is best used
I suggest you search threads with MLTL or BIB ... I think its a good place to start
http://www.quarter-wave.com/index.html
btw ... AN 12" fullrange seems hot at the moment, but maybe a bit difficult ... but there is lots of information and friendly, dedicated and helpfull people in the fullrange threads
And you might also be interested in this thread ... your ribbon might be useable there too, but could be tricky
http://www.diyaudio.com/forums/showthread.php?s=&threadid=106603
This design uses the G3 Si - but you might be able to sub the G2 with a little bit of work on the crossover. Contacting the designer might help.
http://www.humblehomemadehifi.com/Modulus.html
http://www.humblehomemadehifi.com/Modulus.html
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Planars & Exotics
- Help with ribbon project