BOTTLE FISHIN?
Hi,
Reading between the lines and being my good ole' blunt self...
You can actually make your own ECLL800s (or ELL800) as many a vendor has done for the passed 20 years...using a double pico7 socket, a pair of EL95s and one half of an ECC83...well you need to be a bit more inventive than that but that's what it amounts to.
Cheers,
Hi,
So, do you actually have one (or even a pair) of these valves? And what do you intend to do with them?
Reading between the lines and being my good ole' blunt self...
You can actually make your own ECLL800s (or ELL800) as many a vendor has done for the passed 20 years...using a double pico7 socket, a pair of EL95s and one half of an ECC83...well you need to be a bit more inventive than that but that's what it amounts to.
Cheers,
ECLL800
Hi,
Same here...they're extremely sought after by collectors of some older U.S. sixties amps.
Lorenz and TFK were the main manufacturers...hell, nowadays you can even find the resocketed ones anymore.
Cheers,
Hi,
How did you get 2 ECLL800's? I've only seen 1 once in my life, and that was over 25 years ago!
Same here...they're extremely sought after by collectors of some older U.S. sixties amps.
Lorenz and TFK were the main manufacturers...hell, nowadays you can even find the resocketed ones anymore.
Cheers,
Re:ecll800
Hi,
You betcha...either Scott or Fisher used those a lot....Fisher most likely can't quite remember.
Selling them would get you at the very least a half decent amp.
Lucky you,
Hi,
rare hmm
You betcha...either Scott or Fisher used those a lot....Fisher most likely can't quite remember.
Selling them would get you at the very least a half decent amp.
Lucky you,
ECLL800
Hi,
Dunno, I'd start at 80$ a piece but I wouldn't be surprised if they'd catch 100$ in mint condition.
Cheers,
Hi,
thats what i like to here . if i was to put them on e bay what should i ask for em?
Dunno, I'd start at 80$ a piece but I wouldn't be surprised if they'd catch 100$ in mint condition.
Cheers,
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- help with pinout