Ok. Should the transistors. Be glued to the heatsink.
The gunge on the transistors is heatsink thermal grease, it is not glue.
The gunge on the transistors is heatsink thermal grease, it is not glue.
Should I replace that. Or will it being clamped down be
Enough
Should I replace that. Or will it being clamped down be
Enough
I would replace it, ensure the area is made as clean as possible then apply new grease.
The first one with black meter on middle prong and red on them right it reads 9.02 m ohms. Number 2 with black probe on left prong red on right 9.02 m ohms. The third one with black on left red on right reads 9.26 m ohms. The last one with black on middle red on right it reads 18.4 k ohms
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- HELP! I think my jl amp is blown.