Well maybe there is for an Aleph 3.
I have obtained a large number of 15" long 1/4" x 2" extruded aluminum angle pieces. My intention is to mill back one of the legs to ~1-1/4" and mount these on a couple of copper bars to fabricate a large heatsink. The overall dimensions would be 18" x 20" and wind up with 18 legs, each 1/4" x 2". Each of the two sinks would weigh about 20 lbs.
What say you?
One and only?
I have obtained a large number of 15" long 1/4" x 2" extruded aluminum angle pieces. My intention is to mill back one of the legs to ~1-1/4" and mount these on a couple of copper bars to fabricate a large heatsink. The overall dimensions would be 18" x 20" and wind up with 18 legs, each 1/4" x 2". Each of the two sinks would weigh about 20 lbs.
What say you?
One and only?
I just got my BIG heatsinks for my Pass Monster project!!!!
14"L x 7-3/8"W x 3-7/8" Thick!
Yes thats right, nearly 4" thick!!!!
14lbs each, 3 per side, 6 per chassis!
MWAHAHAHAHAHHAA
14"L x 7-3/8"W x 3-7/8" Thick!
An externally hosted image should be here but it was not working when we last tested it.
Yes thats right, nearly 4" thick!!!!
An externally hosted image should be here but it was not working when we last tested it.
14lbs each, 3 per side, 6 per chassis!
MWAHAHAHAHAHHAA
You can't really go wrong with big lumps of metal!
The only issue I can see with heatsinks in the diy arena is cost...
exactly,
and after this there is another issue, space and weight...
Attachments
cocolino said:
exactly,
and after this there is another issue, space and weight...
Hey, if you need more space, I'll lighten the weight. Send a couple to me.
Hey, if you need more space, I'll lighten the weight. Send a couple to me.
You can't be possibly be using all those heatsinks ????? I can drive by to pick some up , it's only 1000km
You`re right, I can`t. Therefore I sold many of them:
http://www.diyaudio.com/forums/showthread.php?threadid=14299&highlight=[/
Still have a nice bunch though
No idea when I´ll have the time to use them, maybe when I`m old and deaf (but when I`m not blind too, at least I have a nice eyecatcher to look at).
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- Heatsinks... no such thing as too much?????