HI, I'm new here and I just aquired a cool device. Its a Grommes / Precision Electronics / Western Electric G5M Tube Mixer. Its a lot like the Altec 1567 Tube mixer but has a lot of important improvements. It has 5 transformer balanced mic inputs, , a line input, tube EQ, and a master gain stage. Basically I want to refresh and modify it. I would like to install DI inputs bypassing the transformer and direct outs for each of the 5 mic channels. It uses both sides of a 12AX7 per channel so I assume there should be sufficient gain for the direct outs. I want to use this as the front end for my DAW. I want the individual outputs for use recording drums and I want to use it as a mixer in its natural state for overdubs, utilising multiple mics into one output. What I'm looking for is any help with this. I could use a schematic if there is one out there. Maybe one of you guys has one of these? How would I go about installing the mods on this? Thanks in advance guys.
Jesse Mesa-Savage
Jesse Mesa-Savage
Hey Ken,Hi guys, I have a schematic for the above mixer along with a few of them.
reply if you are so inclined.
Ken fritz, Richmond, VA
Hope you don't mind me contacting you this way. Any chance you could email me a copy of that Grommes G5M schematic? My address is : ryanpaulyoung@hotmail.com
Also, do you happen to know what type of input transformers it takes / WHERE in the world to get them?
Thanks for any advice you could offer, I appreciate your time.
Cheers,
--ryan
Hi guys, I have a schematic for the above mixer along with a few of them.
reply if you are so inclined.
Ken fritz, Richmond, VA
Hi Ken;
I sent you e-mail.
Would you be so kind to send me a schemo?
Anatoliy
That makes two of us!
Anyone that is looking to seel a GM5 please PM me here as well. Thanks!
Anyone that is looking to seel a GM5 please PM me here as well. Thanks!
If anyone has a G5M that is collecting dust and not seeing much use, please PM me or email me. I've been on the hunt for one. I wish to do some mono recording with it.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- Grommes / Western Electric G5M Tube Mixer Mods