An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
I have two of these heat sinks for sale, along with the parts to make a case identical to the one I made for my Aleph 30. $150.00USD plus shipping.
Note: One of the outside fins on one of the heatsinks is slightly bent (see pics). I'm sure a solid metalworker could straighten this with no problems.
Specs
Length: 17.75 in
Width: 9.75 in
Height: 2.28 in
Weight: 10.35 lbs (for each 17.75 in piece)
Thermal Resistance (degrees C / Watt): 0.29
Aavid Extrusion Number: 62725
Link to Aavid Extrusion Profiles
Case Parts
8 - 3/4in x 3/4in x 9-9/16in solid aluminum square rods
1 - 14.5in x 17.75in x 1/8in aluminum bottom plate
1 - 14.5in x 17.75in x 1/16in aluminum top plate
Note: This makes a case that is 19 inches wide, 17.75 inches deep, and 9.75 inches high.
Email me for more info.
Bryan A. Thompson
batee@fidnet.com
Location: Rolla, Missouri, USA
Price Updated...
No idea how to edit the post above (there is no edit button/link), so I'll try this before re-posting:
I really don't want to throw this stuff away or sell it for scrap!
Price reduced to $100, plus $25 shipping.
Bryan A. Thompson
batee@fidnet.com
No idea how to edit the post above (there is no edit button/link), so I'll try this before re-posting:
I really don't want to throw this stuff away or sell it for scrap!
Price reduced to $100, plus $25 shipping.
Bryan A. Thompson
batee@fidnet.com
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.