Hey Tea-bag I missed the GB (as usual) do you have a full board plus two mini kits (1 x +IRF and 1 x -IRF) left? Thanks!
Yes, I have a few left. PM me your email address and I can send an invoice to you. Thanks. Tea
Hi Laptopav,
Did you check out the first post?
Thanks for your respond Teabag, yes I did look the first post, and excel file, pics and back to the first post but still can not decide what I need to order. You make some confusing when define what is "board"; "BIB LV Shunt Supply, 2+ 1- 25.00", specially with "full board" pics...
With my application: 12VDC with two+ and one -, I guess I have to order the boards (3 actually?) name as "BIB LV Shunt Supply, 2+ 1- 25.00" and some more KIT
but could you tell me what KIT I have to order for my application? There is no explaination what is IRF, BJT, Reflector...
Last edited:
So one BIB board as per the sign up sheet = 2 + rail and 1- rail. This board can be broken to up to three sections.
So if you need 2 12V+ and 1 12- outputs, you would want to 1 board.
And if you wanted the minikits, which I added link in first post, that would be 2 IRF+ and 1 IRF-
The Reflektor-D represents a different project for 3.3v-7v Digital only supplies with a limited current output range. It has its own thread.
IRF kits are 5.5-45v
BJT kits are 3.3-45v
Hope this helps.
So if you need 2 12V+ and 1 12- outputs, you would want to 1 board.
And if you wanted the minikits, which I added link in first post, that would be 2 IRF+ and 1 IRF-
The Reflektor-D represents a different project for 3.3v-7v Digital only supplies with a limited current output range. It has its own thread.
IRF kits are 5.5-45v
BJT kits are 3.3-45v
Hope this helps.
So one BIB board as per the sign up sheet = 2 + rail and 1- rail. This board can be broken to up to three sections.
So if you need 2 12V+ and 1 12- outputs, you would want to 1 board.
And if you wanted the minikits, which I added link in first post, that would be 2 IRF+ and 1 IRF-
The Reflektor-D represents a different project for 3.3v-7v Digital only supplies with a limited current output range. It has its own thread.
IRF kits are 5.5-45v
BJT kits are 3.3-45v
Hope this helps.
Thanks a lot Teabag!
I just update the excel file, I hope there are detail guide to solder parts!
GB ENDING 8-30-2015
The GB for the Salas board is open for payment up until 11:59PM EST 8/30/2015.
Payment is via PayPal invoice only. You will need to send me your paypal email via private message for me to start this process. Then I will invoice the parts you requested from the spreadsheet. If you reply to this email - cut out some of the existing text, otherwise the message is too big.
Customs forms
DO NOT ask for me to fudge up a customs form with really low amount. These are based on reasonable wholesale price.
Shipping
In general boards are a set costs, and mini kits are built into the shipping costs and larger full kits are 10.00-12 to ship. Starting price for shipping is 8.00 for just a small board and can rise from there.
The boards will ship around 2-3 weeks after the GB closes typically. The boards need to be ordered, I don't have them on hand.
BIB
The BIB is a low voltage regulator. It includes 2 positive and 1 negative regulator per board. These have been upgraded to 2mm thickness from 1.6mm. Board production costs have risen , cost is 25.00 per board.
The builders guide is available here in the first post, as well as a current and voltage setting calculator to get the other parts.
http://www.diyaudio.com/forums/grou...-salas-sslv1-1-bib-shunt-reg.html#post2571174
The minikits for the BiB are available for 12.50 each. They dont include all parts to complete a section of the board.
More details on the Minikits are in the Minikit link below.
Here is a picture of the board. Each one includes two positive and one negative rail board. They are scored and can be broken apart
Here is a picture of a mini kit
MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
http://www.diyaudio.com/forums/blogs/tea-bag/741-salas-board-minikits-full-kits.html
The GB for the Salas board is open for payment up until 11:59PM EST 8/30/2015.
Payment is via PayPal invoice only. You will need to send me your paypal email via private message for me to start this process. Then I will invoice the parts you requested from the spreadsheet. If you reply to this email - cut out some of the existing text, otherwise the message is too big.
Customs forms
DO NOT ask for me to fudge up a customs form with really low amount. These are based on reasonable wholesale price.
Shipping
In general boards are a set costs, and mini kits are built into the shipping costs and larger full kits are 10.00-12 to ship. Starting price for shipping is 8.00 for just a small board and can rise from there.
The boards will ship around 2-3 weeks after the GB closes typically. The boards need to be ordered, I don't have them on hand.
BIB
The BIB is a low voltage regulator. It includes 2 positive and 1 negative regulator per board. These have been upgraded to 2mm thickness from 1.6mm. Board production costs have risen , cost is 25.00 per board.
The builders guide is available here in the first post, as well as a current and voltage setting calculator to get the other parts.
http://www.diyaudio.com/forums/grou...-salas-sslv1-1-bib-shunt-reg.html#post2571174
The minikits for the BiB are available for 12.50 each. They dont include all parts to complete a section of the board.
More details on the Minikits are in the Minikit link below.
Here is a picture of the board. Each one includes two positive and one negative rail board. They are scored and can be broken apart
Here is a picture of a mini kit
MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
http://www.diyaudio.com/forums/blogs/tea-bag/741-salas-board-minikits-full-kits.html
last day of GB for Salas Boards 2015 #2
LAST day for Group buy. Please pay invoices by 11:59AM EST. If you want to join GB, please PM email address for paypal invoice to be sent to you, and fill out spreadsheet with desired product. I will send an invoice due today. Thanks to all those who have participated!!
LAST day for Group buy. Please pay invoices by 11:59AM EST. If you want to join GB, please PM email address for paypal invoice to be sent to you, and fill out spreadsheet with desired product. I will send an invoice due today. Thanks to all those who have participated!!
Teabag. If you come across some extra boards let me know. I am looking for 1 pcb and a mini kit good for 18v 500ma to work with my phono box DS.
I might be able to help.I have 1 board.
- Home
- Group Buys
- GB Thread for Salas SSLV1.1 BiB shunt reg