For sale is my trusty Shigaclone MkII from Vicol audio. It has Sanyo Oscon on c10, Blackgate N 100uF on c43 and Duelund Alexander Pio 0,1uF on c8. Some of the solder pads Are very worn due countless times of swapping caps. Price 230e I am giving away a CD silver mica cap for C11 position.
The chips on the bottom have been covered with copper tape for shielding.
I am willing to sell also salas bib configured for 8v, built with audiophile parts, can be configured for 5V too to use for V1, Mills current setting resistor, nichon and blackgate N caps. Price 60e with the blackgate,30e without it.
I also have for sale an aluminium puck for Shiga, price 10euros
The chips on the bottom have been covered with copper tape for shielding.
I am willing to sell also salas bib configured for 8v, built with audiophile parts, can be configured for 5V too to use for V1, Mills current setting resistor, nichon and blackgate N caps. Price 60e with the blackgate,30e without it.
I also have for sale an aluminium puck for Shiga, price 10euros
Attachments
-
3C07DB50-A077-4945-A2AA-B4206F4E19B7.jpg670.9 KB · Views: 329
-
58D3B522-2053-418A-8952-61A39E5CB3C4.jpg572.1 KB · Views: 317
-
2EF7C98B-48C9-45CA-B350-1DC8A025F6EF.jpg666.9 KB · Views: 304
-
75AD28E6-692F-4415-B38B-3A54C5B2656A.jpg588.8 KB · Views: 294
-
A49DA79B-6C49-45DE-8D8A-C68F252365DA.jpg496.3 KB · Views: 283
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.