I came across a great deal on a second pair of 7100 tweeters so my original pair (used for 1 month) needs to be sold. I would like to get $400 shipped for the pair.
I built a center channel using (1) AirCirc and (1) 15H so I no longer have use for their counterparts.
I accidentally touched the backcup of the AirCirc with a soldering iron so it has a defect. I covered the hole with tape which seals it up. i tried finding a replacement with no luck. I would like $100 shipped for the tweeter.
Measurements of the tweeter can be seen at the link below. Dave modded the tweeter for me.
http://www.speakerdesign.net/scan_speak/tweeters/6600/6600_tweeter.html
The 15H driver was recently tested my Mark at the link below:
http://audioheuristics.org/measurements/Testing/Midrange3/midrange_3_test_data.htm
I would like to get $175 shipped for the driver.
If anyone has questions please e-mail me with them.
If anyone is interested in purchasing the single drivers to build the center channel I can pass on the center channel design. The center channel will require a pair of the Dayton Reference 7" (8 ohm) drivers to complete the build.
I built a center channel using (1) AirCirc and (1) 15H so I no longer have use for their counterparts.
I accidentally touched the backcup of the AirCirc with a soldering iron so it has a defect. I covered the hole with tape which seals it up. i tried finding a replacement with no luck. I would like $100 shipped for the tweeter.
Measurements of the tweeter can be seen at the link below. Dave modded the tweeter for me.
http://www.speakerdesign.net/scan_speak/tweeters/6600/6600_tweeter.html
The 15H driver was recently tested my Mark at the link below:
http://audioheuristics.org/measurements/Testing/Midrange3/midrange_3_test_data.htm
I would like to get $175 shipped for the driver.
If anyone has questions please e-mail me with them.
If anyone is interested in purchasing the single drivers to build the center channel I can pass on the center channel design. The center channel will require a pair of the Dayton Reference 7" (8 ohm) drivers to complete the build.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.