FS : ELNA FOR AUDIO 12000uf 63V

[Pocoyo]

Hello
I'm interested on the PC board and 8PC Nichicon KG to.
Picture please..
Shipping to Canada? Let me know how many caps you can send before the shipping cost goes up drastically..
Greetings G

Take Picture ... ACTION !
for 10 pcs is 500 gr shipping US$ 13
for 20 pcs is 1000 gr shipping US$ 22
for 40 pcs is 2000 gr shipping US$ 32

BTW some DIY here like to use it in DAC PSU

Can you post a picture from you Nichicon KG caps
Thank you
Do the PS PC board CRC type? Is there room for resistors between the caps?

Greetings G

picture attached
you can cut the rail and solder resistor direct to caps feet
you need to give the feet for PCB, Resistor will be place downside
so it is ok if you wanna do like pass psu
(Just use cutter to cut off the rail, i can cut it for you)

 

[Pocoyo]

Hi G

For 200 pcs is 5000 gr shipping US$ 40 (by ship : 60 days)
They have registered number too but you cant trace
but you need ask the post office when it is 45 days

i remember i sent 200 pcs elna for audio too to Canada

Rgds, J

 

[RajkoM]

Hi Jeffry, you got PM.
Thanks

 

[Pocoyo]

pm replied

 

[RajkoM]

Payment sent

 

[RCruz]

Hi Jeffry, you have PM

 

[Pocoyo]

All Nichicon KG was gone


Dear Radjko & RCruz
Email received & you got the final caps
Best regards

 

[RCruz]

Ups... I did not see this post before I answered the PM

Do you still have PCB boards ?

 

[Pocoyo]

Yes RCruz I still have it
I save 4 caps 4700uf for you

Best regards

 

[RCruz]

Hi Jeffry

Just sent you payment.

You also have PM with my actual address in Switzerland.

Please let me know if everything is allright

Best
Ricardo

 

[evette]

Get some more please. Evette

 

[RCruz]

Hi Jeffry

Just sent you payment.

You also have PM with my actual address in Switzerland.

Please let me know if everything is allright

Best
Ricardo

Is everything allright Jeffry ?

 

[Pocoyo]

Is everything allright Jeffry ?

Hi RCruz

Everything is ok, just a litlle bit busy in the office
Meeting ... Meeting ... And meeting again

I will try to send your caps & etc tomorrow or friday
( My wife go and drop to post office to send it )
So need to wait sometime for her kindness

Best regards

 

[RCruz]

Thank you so much.

I do apreciate the way you relate with others.

Would you be so kind to send me a tracking number afterwards ?

Regards

Ricardo

 

[Pocoyo]

Thank you so much.

I do apreciate the way you relate with others.

Would you be so kind to send me a tracking number afterwards ?

Regards

Ricardo

I will give you the registered number
You can tracking them after 12 - 18 days
On your post office web to know where
they are in your country

In this thread a lot of registered post show

 

[RCruz]

Thank you again

 

[Pocoyo]

Get some more please. Evette

Hi Evette

Looks like age 38 make me a little bit old
I really really forget ... Very very sorry

Will do after arrive at home
Maybe repack quan chassis yesterday
Make me very tired

Best regards

 

[evette]

Don,t worry about it Sir. Evette

 

[Pocoyo]

This is the new picture, Action !

If you push to load 6 caps 35 mm on the PCB
you can take the power directly from caps feet
For Bridge Feet still can solder from bottom PCB

 

[engel dela pena]

how about philippines?shipping cost?