My Aleph 5 is being sacrificed to help finance and supply heatsinks for my upcoming F5. Hence the following parts are for sale.
I have two 300VA 30v secondary Toriods for sale. They are Plitron Part #077017201. They are $94++CAN new and I'm asking $45 each and I'll throw in the two 60A bridge rectifiers with each toroid.
Next is the four Hammond 159ZL inductors I used in this power supply. You can read up on their specs at: Hammond Mfg. - D.C. Filter Chokes - (153 - 159 Series)
When you can find them they are 32$CAN each. I'm asking $15.
BTW. My Aleph 5 power supply was modelled after the following schematic:
And finally the caps. These are 68,000uf/50V caps which means each bank in the picture below has 272,000uf or over half a farad for both. Per Kristijan's schematic they they are bypassed with a 4.7uF/600V film cap. Here's a pic of the bare cap:
And here is a picture of the caps as they sit today. As you can see they are properly mounted via the correct capacitor clamps. For the right buyer I will cut these in half and sell them premounted and ready to go. Or sell it as one piece. I'm asking $50 per side or $100 for all eight+Bypass.
Regards,
Dan
I have two 300VA 30v secondary Toriods for sale. They are Plitron Part #077017201. They are $94++CAN new and I'm asking $45 each and I'll throw in the two 60A bridge rectifiers with each toroid.
Next is the four Hammond 159ZL inductors I used in this power supply. You can read up on their specs at: Hammond Mfg. - D.C. Filter Chokes - (153 - 159 Series)
When you can find them they are 32$CAN each. I'm asking $15.
BTW. My Aleph 5 power supply was modelled after the following schematic:
And finally the caps. These are 68,000uf/50V caps which means each bank in the picture below has 272,000uf or over half a farad for both. Per Kristijan's schematic they they are bypassed with a 4.7uF/600V film cap. Here's a pic of the bare cap:
And here is a picture of the caps as they sit today. As you can see they are properly mounted via the correct capacitor clamps. For the right buyer I will cut these in half and sell them premounted and ready to go. Or sell it as one piece. I'm asking $50 per side or $100 for all eight+Bypass.
Regards,
Dan
dan,
use those caps in F5. At least half of it.
A sound suggestion but I've decided to try some different caps. It's the DIYer in me out of control?
Regards,
Dan
Normal
Dont worry, It is normal just make you a little bit crazy
my wife said
If i look you now from bought coffee
you never bought them in starbucks (US$ 5 here),
always looks for the cheaper (US$ 0,5)
but i didnt understand why you bought caps & other thing
nearly US$ 100. Ha ha ha ha
DIY make you happy
Nichicon KG super through reported as one of the best caps supply
Btw a little bit promotion
wanna try these http://www.diyaudio.com/forums/swap-meet/166521-fs-elna-audio-12000uf-63v.html
@ US$4 each
shipping for 4 caps US$ 15 / for 8 caps US$ 28 / for 16 caps US$ 40
A sound suggestion but I've decided to try some different caps. It's the DIYer in me out of control?
Regards,
Dan
Dont worry, It is normal just make you a little bit crazy
my wife said
If i look you now from bought coffee
you never bought them in starbucks (US$ 5 here),
always looks for the cheaper (US$ 0,5)
but i didnt understand why you bought caps & other thing
nearly US$ 100. Ha ha ha ha
DIY make you happy
Nichicon KG super through reported as one of the best caps supply
Btw a little bit promotion
wanna try these http://www.diyaudio.com/forums/swap-meet/166521-fs-elna-audio-12000uf-63v.html
@ US$4 each
shipping for 4 caps US$ 15 / for 8 caps US$ 28 / for 16 caps US$ 40
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.