is the first thing I did, guess what..... 400€ for it!! and fully available! so was wandering if any body have a spare one !!!! like this one
http://app.audiogon.com/listings/revel-salon-front-tweeter-new
http://app.audiogon.com/listings/revel-salon-front-tweeter-new
As fare as I know, the tweeter is a standard Scan Speak D2904/980000
http://www.scan-speak.dk/datasheet/pdf/d2904-980000.pdf
you can get them every where!
http://www.scan-speak.dk/datasheet/pdf/d2904-980000.pdf
you can get them every where!
Contact Scanspeak, probably they can advice you what could be current model which you can buy. Or buy it to get diaphragms.no way.....it means denaturalze the loudspeakers my aim is spend as less as possible for an original replacement! thanks anyway
Another advice: you need to change tweeters in pairs, or at least measure them after replacement to be sure that new and old are identical.
first thing, i get signal from them... so Xover is fine...Just asking. Are the wires tight all the way down to the crossover?
Thanks
I'll keep for a while.Sorry to hear that. I wish you luck!
thanks for support!
hi,
not having replay from S.S. I made a phone call.... well the D2904/9800 from classic line is the customizes tweeter used for the Salon, the only two visible differences are the dust cover on the dome and the second magnet for shilding. On monday someone from technical dep. will tell me if the electrical data are customized, if they are I will quit and buy the Revel one!
not having replay from S.S. I made a phone call.... well the D2904/9800 from classic line is the customizes tweeter used for the Salon, the only two visible differences are the dust cover on the dome and the second magnet for shilding. On monday someone from technical dep. will tell me if the electrical data are customized, if they are I will quit and buy the Revel one!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- front tweeter for Revel Salon 1