We've finished putting our sub woofer together and have no use for one of the early test bed cabinets that I constructed.
It's built from 25mm MDF braced internally at the corners but measuring in at 40cm[d] x 40cm[w] x 50cm[h] is quite rigid.
There are cut-outs for driver and amp module, though with some deft routeing you could blank the hole / holes with 25mm MDF and cut out your own sizes.
Currently it will accommodate a 12" [305mm] amp panel [Keiga KGND 52100] and a 12" driver [Shadow Works - Titan, Phantom, Bronze, Genesis] with cut-out 282mm and rebate 322mm
It could possibly be finished with a bit of elbow grease and some TLC.
Images below.
Free to someone who will collect from OX9 3JF
It's built from 25mm MDF braced internally at the corners but measuring in at 40cm[d] x 40cm[w] x 50cm[h] is quite rigid.
There are cut-outs for driver and amp module, though with some deft routeing you could blank the hole / holes with 25mm MDF and cut out your own sizes.
Currently it will accommodate a 12" [305mm] amp panel [Keiga KGND 52100] and a 12" driver [Shadow Works - Titan, Phantom, Bronze, Genesis] with cut-out 282mm and rebate 322mm
It could possibly be finished with a bit of elbow grease and some TLC.
Images below.
Free to someone who will collect from OX9 3JF
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- Free subwoofer cabinet for collection