this is my system I`v just finished working on
There are 2 amps, a 400w esp amp i`v built driving a 15inch sub, and a 100w amp driving 10 3inch drivers connected as a 1.5ohm load.
the esp amp is water cooled, with a radiator, pump 6 computer fans temperatur meter etc. I also bult a crossover for spiting the high and low signal feeds to the amps. there is also 2 led vu meters.
There are 2 amps, a 400w esp amp i`v built driving a 15inch sub, and a 100w amp driving 10 3inch drivers connected as a 1.5ohm load.
the esp amp is water cooled, with a radiator, pump 6 computer fans temperatur meter etc. I also bult a crossover for spiting the high and low signal feeds to the amps. there is also 2 led vu meters.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- finished project