nope, but we can get you close.................
stereolabs horns 400hz on ebay, not cheap but probably very good.
Use a 2" compression driver (community m200a) from 600hz to 4khz.
I'd use a 15 under and a piezo above.
I think it is a 1" rcf used in the avantegarde.
Active crossover also, passive will be a pain.
Norman
stereolabs horns 400hz on ebay, not cheap but probably very good.
Use a 2" compression driver (community m200a) from 600hz to 4khz.
I'd use a 15 under and a piezo above.
I think it is a 1" rcf used in the avantegarde.
Active crossover also, passive will be a pain.
Norman
Yes, I have built a couple of versions, but they are long dismantled as I've moved to smaller digs. I've not been all that impressed with the AG's I've heard.neil_kaye said:
Does anyone know of a DIY project that has successfully built a pair of great sounding horns?
Cheers
Neil
As a for instance, check out Erik's system.
www.volvotreter.de
I've not seen any full designs posted in as much detail.
My last system was similar MF/HF with an expo midbass and LABsubs for bass, quad amped. I used his EVM12L midbass in an earlier incarnation.
http://www.jblproservice.com/pdf/AE Series/AM4200,95-WH.pdf
http://www.jblproservice.com/pdf/AE Series/AM6200,95-WH.pdf
Separate mid waveguide here:
http://www.jblproservice.com/pdf/PRX Series/PRX535.pdf
The mid driver in that one is made by Eminence.
Yeah, I have all that stuff over here....
http://www.jblproservice.com/pdf/AE Series/AM6200,95-WH.pdf
Separate mid waveguide here:
http://www.jblproservice.com/pdf/PRX Series/PRX535.pdf
The mid driver in that one is made by Eminence.
Yeah, I have all that stuff over here....
neil_kaye said:Hi,
I am interested in building a pair of horns along the lines of the Avante-garde Nano Uno's i.e active subwoofer, horn mid and horn tweeter.
Does anyone know of a DIY project that has successfully built a pair of great sounding horns?
Cheers
Neil
Have you heard them? I've listened to them twice, and was disappointed both times. I've heard a handful of horns at half the price which sounded twice as good.
I have built several loudspeakers but never horns.
I admit to being seduced by the form of the Nano's and I have just started to investigate the possibility of building something similar. Never heard them but they recently received a decent review in Stereophile so it caught my interest
I appreciate all the feedback.
Again i am in the "what if" stage so still along way to go
Cheers
Neil
I admit to being seduced by the form of the Nano's and I have just started to investigate the possibility of building something similar. Never heard them but they recently received a decent review in Stereophile so it caught my interest
I appreciate all the feedback.
Again i am in the "what if" stage so still along way to go
Cheers
Neil
DIAR said:There is a positive review of UNO NANO on STEREOPHILE MAGAZINE JULY 2009, VOL. 32, NO. 7
In short: the measurements looked horrible but sound was very good.
Isn't that par for the course? Stereophile habitually gives positive reviews. I'd take anything they say with a grain of salt.
Horns are tricky, hard to get out every reflection.
And breaks in the angle, or any parallel surfaces, you are screwed.
And again, most non cd horns require eq (the compression drivers roll off.
I'd say only a handfull of horns are usable for home audio (practically zero echo).
The stereolab 2" 400hz horn (600hz at 24db), but this is 1.4"
http://cgi.ebay.com/Spheric-Wave-Tr...n?hash=item2c4c10aa9c&_trksid=p3286.m20.l1116
The mcm 55-480 horn with thread on adapter crossable at 2khz
http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-H-65-/54-580
And maybe the yamaha round horn used in club series but I've only heard once.
http://cgi.ebay.com/1pc-Yamaha-Roun...66:2|39:1|72:1205|240:1318|301:0|293:1|294:50
But that would involve a 3-way or eq, and an active crossover.
But the top 2 and probably the bottom 1 are fine sounding horns.
Norman
And breaks in the angle, or any parallel surfaces, you are screwed.
And again, most non cd horns require eq (the compression drivers roll off.
I'd say only a handfull of horns are usable for home audio (practically zero echo).
The stereolab 2" 400hz horn (600hz at 24db), but this is 1.4"
http://cgi.ebay.com/Spheric-Wave-Tr...n?hash=item2c4c10aa9c&_trksid=p3286.m20.l1116
The mcm 55-480 horn with thread on adapter crossable at 2khz
http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-H-65-/54-580
And maybe the yamaha round horn used in club series but I've only heard once.
http://cgi.ebay.com/1pc-Yamaha-Roun...66:2|39:1|72:1205|240:1318|301:0|293:1|294:50
But that would involve a 3-way or eq, and an active crossover.
But the top 2 and probably the bottom 1 are fine sounding horns.
Norman
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Fine sounding Horns