Hey guys, does anyone have a eagle layout, preferibly a tryed and tested one that I can use to base my design on? ( I need the actaul eagle files, so that i can export the gerber file etc and have 5 or 10 made)
im after a parallel or bridged version and also a pcb for non bridged/parallel (as in stereo)
im looking to build a 3 stereo versions(6 channels) and 1 bridge parallel version(sub) for 5.1 sound system.
Cheers.
im after a parallel or bridged version and also a pcb for non bridged/parallel (as in stereo)
im looking to build a 3 stereo versions(6 channels) and 1 bridge parallel version(sub) for 5.1 sound system.
Cheers.
first time making a pcb for one of these, could someone give me some feedback/double check this design for me?
An externally hosted image should be here but it was not working when we last tested it.
well im getting some other pcbs made, so im going to get 20 or so of the one i drew up, seem alright to me, ive made quite a few changes since the attached above image, eg hole sizes, track widths, added a few filter caps
theres one PCB(non-amp) of mine I NEED made, but ordering just one is a waste of time so ill 20 of these pcbs + the one i need, so i guess we'll see how it goes. ( Ijust tile them and pay one design free)
gonna cost me about $28bucks US shipped for 20 of them with no silkscreen or soldermask, double sided...so its not too bad if it doesnt work i guess.. if it does, then great...
but nobody seems interested in checking it over for me/confirming its ok.
theres one PCB(non-amp) of mine I NEED made, but ordering just one is a waste of time so ill 20 of these pcbs + the one i need, so i guess we'll see how it goes. ( Ijust tile them and pay one design free)
gonna cost me about $28bucks US shipped for 20 of them with no silkscreen or soldermask, double sided...so its not too bad if it doesnt work i guess.. if it does, then great...
but nobody seems interested in checking it over for me/confirming its ok.
gosh, out of everyone thats made a lm4780 pcb, no ones willing to put the gerber output files ready for pcb manufactor(include credits all over the board, i dont care, i just want a working pcb, lol), or the original eagle files up?
or even a PROVEN working layout, as i see that bryans layout that i tried to copy is not that is being used, so i need to redo it
or even a PROVEN working layout, as i see that bryans layout that i tried to copy is not that is being used, so i need to redo it
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Chip Amps
- eagle layout for lm4780