I guess this has been asked many times before, so I"ll keep this reasonably brief
Looking to build a pair of floorstanders, mainly for use with valve amps but also SS amps. Have given up looking at "reviews" as I'm finding it all too personal and what sounds good in one persons room set-up might not work in another, so decided to look at the choices from a more technical point of view, and that groups of people like
I have access to full cnc woodworking facilities so extremely complicated enclosures are not a problem.
I can use a soldering iron so crossovers, etc are no problem
What I am looking for is full plans, (cabinet and electronic) of a design that is technically excellent, and also that a number of people like!!!! I did look at building the Ariel speakers, but I see the drivers are no longer available, which leads me to the next point
A design that uses current production drivers, or a like-for-like alternative is available or recommended, a number of designs I have come across all use out-of-production drivers which is not much help.
I listen to a variety of music, and sit around 4m away from the speakers, so any advice on what design (transmission line, sealed box,etc) to go for would be helpful too.
Looking to build a pair of floorstanders, mainly for use with valve amps but also SS amps. Have given up looking at "reviews" as I'm finding it all too personal and what sounds good in one persons room set-up might not work in another, so decided to look at the choices from a more technical point of view, and that groups of people like
I have access to full cnc woodworking facilities so extremely complicated enclosures are not a problem.
I can use a soldering iron so crossovers, etc are no problem
What I am looking for is full plans, (cabinet and electronic) of a design that is technically excellent, and also that a number of people like!!!! I did look at building the Ariel speakers, but I see the drivers are no longer available, which leads me to the next point
A design that uses current production drivers, or a like-for-like alternative is available or recommended, a number of designs I have come across all use out-of-production drivers which is not much help.
I listen to a variety of music, and sit around 4m away from the speakers, so any advice on what design (transmission line, sealed box,etc) to go for would be helpful too.
Have you read THIS?
I agree. If you read the whole site, particularly his recommendations of his own designs, you'll not only learn a lot, but know which of his systems would best suit you.
Hi Angga
You can try these DTQWT-mkII
you will never regret
and here some response from the other builder builders response
you can play with ss and tube, satisfaction guarantee
You can try these DTQWT-mkII
you will never regret
and here some response from the other builder builders response
you can play with ss and tube, satisfaction guarantee
satisfaction guarantee
How do you know that
I've heard those words a lot from those who build/design a speaker much more expensive than their previous builds.
Wilson WATT/Puppy is expensive. Satisfaction guaranteed if you exclude the money, or if your previous speaker is a Warfedale.
this is some response from our forum diyaudio
http://www.diyaudio.com/forums/multi-way/148080-troels-dtqwt.html
if you want to build simple speaker you can choose tqwt or
if you want to build better you can build dtqwt mk2 or 12
http://www.diyaudio.com/forums/multi-way/148080-troels-dtqwt.html
if you want to build simple speaker you can choose tqwt or
if you want to build better you can build dtqwt mk2 or 12
Hi Pico
if you mean where do i get ? go to the speaker website
DTQWT-mkII then you can contact email there
looks like he sold the TWO34XO, JA8008, ED ii 2510 some builders in USA even
bought them in place near them (Parts express)
i didnt said you build DTQWT use Dynaudio Drivers
for some cheap capacitor you can use K73-16 from Russian, if you can add some
budget you can join them with others caps you like ( Mundorf, Vcaps or Jantzen )
im join k73-16 & Mundorf SGIO, k73-16 & Auri and k73-16 & MSIO
For me there is no exact science in audio world
it will always back again to your taste
best regards
if you mean where do i get ? go to the speaker website
DTQWT-mkII then you can contact email there
looks like he sold the TWO34XO, JA8008, ED ii 2510 some builders in USA even
bought them in place near them (Parts express)
i didnt said you build DTQWT use Dynaudio Drivers
for some cheap capacitor you can use K73-16 from Russian, if you can add some
budget you can join them with others caps you like ( Mundorf, Vcaps or Jantzen )
im join k73-16 & Mundorf SGIO, k73-16 & Auri and k73-16 & MSIO
For me there is no exact science in audio world
it will always back again to your taste
best regards
I was just making fun with your name
And I guess that you were pointing to Troels website ( I didn't check, actually )
which is no problem for me, since I've been doing TLs and variations from
a long time...the latest is a bomb, I tried 1 week ago .
About science in speakers and the audio chain:
I absolutely believe in mechanical indipendence from driver to driver, which is actuated with rubber bands. Also crossover components, they stay well out of the box ( if any ...).
I'm finishing my rubberband suspended Cd player.
The science tells that you have to let the electronics and mechanical parts work in the audio band only, so if you suspend them with rubber bands ( or air springs, which work with pressure not traction ) to allow them to oscillate at subsonic frequency, you have eliminated one of the major issues, the masking of the sound,
And I guess that you were pointing to Troels website ( I didn't check, actually )
which is no problem for me, since I've been doing TLs and variations from
a long time...the latest is a bomb, I tried 1 week ago .
About science in speakers and the audio chain:
I absolutely believe in mechanical indipendence from driver to driver, which is actuated with rubber bands. Also crossover components, they stay well out of the box ( if any ...).
I'm finishing my rubberband suspended Cd player.
The science tells that you have to let the electronics and mechanical parts work in the audio band only, so if you suspend them with rubber bands ( or air springs, which work with pressure not traction ) to allow them to oscillate at subsonic frequency, you have eliminated one of the major issues, the masking of the sound,
Check out the kits from GR Research. You get everything in the kit except the cabinet.
Speaker kits, loudspeaker design services, sub-woofers and amplifiers.
They also have a forum on AudioCircle where you can ask questions. Great company. I have built the X-LS. Look at the N3 model based on what you described you were looking for.
Speaker kits, loudspeaker design services, sub-woofers and amplifiers.
They also have a forum on AudioCircle where you can ask questions. Great company. I have built the X-LS. Look at the N3 model based on what you described you were looking for.
At htguide there is a sticky thread guide to completed projects. Descriptions include some info about reception, often at competitions. Top end designers. Also zaphaudio.com Mark K's Speaker Pages. Zaphaudio has some kits through madisound that are good value but no idea what it's like to get them to uk.
Some good suggestions there, one design I was considering were these from Tony Gee using scanspeak drivers, any comments on these???
Humble Homemade Hifi
Humble Homemade Hifi
Some good suggestions there, one design I was considering were these from Tony Gee using scanspeak drivers, any comments on these???
Humble Homemade Hifi
Top quality drivers. If you have the money, there is nothing wrong in investing at something like these, imo (I'm talking about the 2-way). I'm not fond of series crossover though, especially with RLCs all over the place (and look at the impedance curve, the drivers deserve something better imo). But crossover is cheap compared to the drivers so you can explore or try many designs, just make sure you get the enclosure right in the first place.
Last edited:
A buddy and I are buliding 2 sets of the full size statements.
I have paradigm S-6's and he has maggies 3.6's I think.
We have one set done... Kinda. We have to finish sealing and putting in the fiberglass
And filling the mid tunnles.
Even at 90% done, we both would gladly give up our commercial speakers.
I loved maggies but missed the lowend punch.
The statements have the magic of the maggies, the punch they lack and they are wonderfull!
I can't find the speakers. Sound stage so huge! I couldn't go back to my paradigms. And I love my digms!
I have paradigm S-6's and he has maggies 3.6's I think.
We have one set done... Kinda. We have to finish sealing and putting in the fiberglass
And filling the mid tunnles.
Even at 90% done, we both would gladly give up our commercial speakers.
I loved maggies but missed the lowend punch.
The statements have the magic of the maggies, the punch they lack and they are wonderfull!
I can't find the speakers. Sound stage so huge! I couldn't go back to my paradigms. And I love my digms!
I released a MTM mass loaded transmission line (MLTL) design for the Triton bookshelf speakers about five months ago. Excellent performance and great looks. A parts kit is available from Meniscus Audio or Creative Sound Solutions for about $600.
http://www.diyaudio.com/forums/multi-way/226173-triton-mtm-grows-legs-mltl-design.html
Triton, Pr.
Creative Sound Solutions - Loudspeakers, Parts and DIY Speaker Kits
http://www.diyaudio.com/forums/multi-way/226173-triton-mtm-grows-legs-mltl-design.html
Triton, Pr.
Creative Sound Solutions - Loudspeakers, Parts and DIY Speaker Kits
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- DIY floor stander speaker advice