The CE3004 schematic is at:-
http://homepage.ntlworld.com/bepowell/schematics/CE3004.pdf
http://homepage.ntlworld.com/bepowell/schematics/CE3004.pdf
Broken Link
Hi Brian,
tried accessing this link
http://homepage.ntlworld.com/bepowel...tics/CPR1b.pdf
to no effect. The thread is a few years old. Have you moved house...
Cheers,
Nigel
Hi Brian,
tried accessing this link
http://homepage.ntlworld.com/bepowel...tics/CPR1b.pdf
to no effect. The thread is a few years old. Have you moved house...
Cheers,
Nigel
Anybody know how to set the trimpot on CE1708 modules, I’m guessing it’s the standing current in one of the supply lines with or without load ???
20mA in positive supply line. See 2nd page in this file posted above: http://www.diyaudio.com/forums/attachments/solid-state/595231d1485631575-crimson-elektrik-pcbs-crimsonce1008vii-pdf
Load connected or not shouldn't matter as long as offset is low enough.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- Crimson Elektrik PCB's