JBL 2440 pr 500.00
JBL 2480 pr 500.00
TAD 4001 pr 700.00
Cerwin Vega 1601 750.00 pr
Vitavox S2 450.00 pr
Emilar EC320A 500.00 pr
Altec 288a 400 pr
Altec 292 550 pr
All working perfectly and fully tested with impedence, frequency and distortion sweeps as well as CSD - many with cosmetic problems - Others available just email
All plus shipping
JBL 2480 pr 500.00
TAD 4001 pr 700.00
Cerwin Vega 1601 750.00 pr
Vitavox S2 450.00 pr
Emilar EC320A 500.00 pr
Altec 288a 400 pr
Altec 292 550 pr
All working perfectly and fully tested with impedence, frequency and distortion sweeps as well as CSD - many with cosmetic problems - Others available just email
All plus shipping
Magnetar said:JBL 2440 pr 500.00 SOLD
JBL 2480 pr 500.00 PENDING
TAD 4001 pr 700.00 SOLD
Cerwin Vega 1601 750.00 pr
Vitavox S2 450.00 pr SOLD
Emilar EC320A 500.00 pr
Altec 288a 400 pr SOLD
Altec 292 550 pr PENDING
All working perfectly and fully tested with impedence, frequency and distortion sweeps as well as CSD - many with cosmetic problems - Others available just email
All plus shipping
Some of these are sold as posted above. I posted this yesterday but someone deleted it!
You can contact me via email or private messegering. Unless someone is screwing with that too. I checked and it is setup correctly. Thanks
The CV 1601's are left - these are very nice sounding drivers with phenolic diaphragms 300 to 6K response 'Vintage' warm sweet lucid midrange sound with the right horn- 2" exit large format REDUCED to 300 for the pair
Emilar One Plus Engineering EC320C 2" exit large format aluminum diaphragm with mylar surround. These are IMO better than the TADs in tone and listen ability (low fatigue, yet high resolution) - REDUCED to 300 for the pair
Only TADs on hand I have left/want to let go are TM 1201's that need reconed - 150 for the pair - MONSTER magnets yet fragile carbon cone. These are probably expensive to recone to original - I was going to recone them with a paper cone and Jensen style Flexair surround.
My email seems to be working now
Emilar One Plus Engineering EC320C 2" exit large format aluminum diaphragm with mylar surround. These are IMO better than the TADs in tone and listen ability (low fatigue, yet high resolution) - REDUCED to 300 for the pair
Only TADs on hand I have left/want to let go are TM 1201's that need reconed - 150 for the pair - MONSTER magnets yet fragile carbon cone. These are probably expensive to recone to original - I was going to recone them with a paper cone and Jensen style Flexair surround.
My email seems to be working now
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.