Hi, what uf/c capacitator I should use to cross the FT17H with FF225k? at what frequency should I cross?
Looking at the graph I think at least 10000 max 11000, right?
This quality is
http://www.lautsprechershop.de/hifi/condens_en.htm#mkp_sn
or this
http://www.lautsprechershop.de/hifi/cond_mun_en.htm#mcap
is ok?
I need an empty pcb? like this:
http://www.lautsprechershop.de/hifi/leiterplatte_en.htm
I want the level control:
Level control PS 8/100
http://www.lautsprechershop.de/hifi/pegel_en.htm
the mono version, right?
thak you
Looking at the graph I think at least 10000 max 11000, right?
This quality is
http://www.lautsprechershop.de/hifi/condens_en.htm#mkp_sn
or this
http://www.lautsprechershop.de/hifi/cond_mun_en.htm#mcap
is ok?
I need an empty pcb? like this:
http://www.lautsprechershop.de/hifi/leiterplatte_en.htm
I want the level control:
Level control PS 8/100
http://www.lautsprechershop.de/hifi/pegel_en.htm
the mono version, right?
thak you
I found this calculator on the same site:
http://www.lautsprechershop.de/tools/t_condensor_en.htm
But if the Ft17h is 98,5 db and ff225k is 96db I need a level control, or not? or anyway could be usefull...
I don't need a pcb, but how I connect together the two speaker if I can't access to blinding post.
http://www.lautsprechershop.de/tools/t_condensor_en.htm
But if the Ft17h is 98,5 db and ff225k is 96db I need a level control, or not? or anyway could be usefull...
I don't need a pcb, but how I connect together the two speaker if I can't access to blinding post.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.